Konica Minolta DRYPRO Model 793 Operation Manual page 146

Ch.7 Care & Maintenance
When failed to install the Deodorant Filter Case or forgot install it, a message "FIL-
TER EXCHANGE" will be displayed again. Touch the [FILTER EXCHANGE] button
and install the Deodorant Filter Case.
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
7
Prepare a new Deodorant Filter.
8
Install the new Deodorant Filter.
- As shown in the figure, insert the Deodorant Filter deep
enough with the handle to the front and the holes on the
cardboard to the top.
9
Close the Deodorant Filter Cover. (2 in the left
fig.)
10
Slide the Deodorant Filter Cover to the right. (1 in
the left fig.)
- The Deodorant Filter Cover will be locked.
11
Turn the Lever-A clockwise. (2 in the left fig.)
- The Deodorant Filter Case will be locked to the
DRYPRO 793.
12
Close the Front Top Cover.
- "READY" will be displayed in the message column, and
the DRYPRO 793 becomes ready to print.
< 144 >
Animation of Deodorant
Filter Change 2-(2)
Animation of Deodorant
Filter Change 3