Calibration - Konica Minolta DRYPRO Model 793 Operation Manual

Ch.4 Maintenance Mode
4-4-5 CALIBRATION <PRINT SETUP>
Allows to calibrate and correct the density of the printed film.
The DRYPRO793 incorporates a densitometer in the Cooling/Discharge section, which enables to per-
form an automatic density control of the image every time when a new film package is loaded.
In normal condition, it is not necessary to make a density correction of the image. However, when a
density irregularity occurs, follow the procedures below to print a calibration sheet to perform an auto-
matic density correction.
3
Description of [SUPPLY TRAY] button display
From the left, output tray information, that are "1: Tray No.", "2: Film Size",
"3: Film Type", "4: Copies" are displayed on the [SUPPLY TRAY] button.
5
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
1
Change to the Maintenance Mode.
2
Touch the [PRINT SETUP] button of the "Main-
tenance" screen.
3
Touch the [CALIBRATION] button.
- "Output Tray Select" screen will be displayed.
- Touching the [RETURN] button will exit the Mainte-
nance Mode, and return to the Normal screen.
4
Touch the arrow buttons [t], [s] to select the
tray for the film to be printed.
4
5
Touch the [PRINT] button.
- A confirmation message will be displayed.
< 64 >
User Level
1 2 3
● ● ●
Disp
● ● ●
Ope
p.52 Switching to
the Mainte-
nance Mode