Konica Minolta DRYPRO Model 793 Operation Manual page 34

Ch.3 Operation
4
Nothing appears on the screen
while it is in sleep mode.
Sleep Mode
This is a mode when the shutdown is per-
formed using the start timer function. Timer
lamp (green) lights. Touching the operation
panel (LCD) will display the "Sleep Mode
Cancel" screen.
When the DRYPRO 793 is shut down using the start timer, do not turn OFF the
power breaker even though the device is in sleep mode.
When the power failure occurs while the DRYPRO 793 is in the sleep mode, the
setup made by the start timer will be cancelled, and the DRYPRO 793 is turned OFF.
Press the [Operation] button to restart the DRYPRO 793.
When the shutdown was not made correctly last time, the DRYPRO 793 may not start
up even when the [Operation] button is pressed. If such occurs, first of all, turn OFF the
power breaker located on the bottom of the main body's right cover, and press the
[Operation] button after waiting for 10 seconds or more to start up the DRYPRO 793.
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
4
Touch the [OK] button.
- Saves the selected day & time for the next startup, and
enters the sleep mode.
- Touching the [RETURN] button will cancel the start
timer setup, and returns to the print ready status.
< 32 >
Each fan continues
operation in order to
cool inside of the unit
for about 1 hour.
Timer Lamp
p.33 Cancelling
the sleep
mode