Konica Minolta DRYPRO Model 793 Operation Manual page 98

Ch.4 Maintenance Mode
Insert the cleaning sheet always parallel to
the Cleaning Roller.
Do not pull the cleaning sheet forcefully. Send it thorough the rollers until it com-
pletely comes out only by pushing the Lever.
Be careful not to drop the cleaning film into
the main unit.
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
6
Insert the cleaning sheet parallel to the roller
surface between the Cleaning Roller and the
Facing Roller. (4 in the left fig)
7
As shown in the fig, move the Lever up and
down while holding the top edge of the cleaning
sheet with a hand.
- Cleaning sheet will be sent through between the Cleaning
Roller and the Facing Roller.
8
Switch your hand to hold the other edge of the
cleaning sheet when it comes out between the
Cleaning Roller and Facing Roller, and push the
Lever up and down with your right hand to send
the cleaning sheet through.
9
Repeat the step 6 through 9 to send the cleaning
sheet several times between the rollers when
necessary.
< 96 >