Ch.6 Troubleshooting; Error Message And Reaction - Konica Minolta DRYPRO Model 793 Operation Manual

Ch.6 Troubleshooting

6-1 Error Message and Reaction

When an error occurs on the DRYPRO 793, corresponding error code and error message will be displayed in the
message column of the Operation Panel. Errors displayed on the DRYPRO 793 and reaction to be taken are listed
below.
Error Code Error Message
E4110 Film pickup error.
Press release button and follow the direction provided. Press [Error Reset] button, follow the instruction.
E4111 ID_ERR_MEC1_FILMJAM
Press the release button and remove the film.
E4125 ERR_MEC1_TRAY1OPEN
Close the tray and press the release button.
E4140 ID_ERR_MEC1_SORTERFAIL
Confirm the setting and press the release button.
E4141 ID_ERR_MEC1_SORTERFAIL
Confirm the setting and press the release button.
E4142 ID_ERR_MEC1_SORTERFAIL
Confirm the setting and press the release button.
E4210 FILM PICKUP ERROR.
Press release button and follow the direction provided.
E4211 ID_ERR_MEC1_FILMJAM
Press the release button and remove the film.
E4225 ID_ERR_MEC1_TRAY2OPEN
Close the tray and press the release button.
E4240 ID_ERR_MEC1_SORTERFAIL
Confirm the setting and press the release button.
E4241 ID_ERR_MEC1_SORTERFAIL
Confirm the setting and press the release button.
E4242 ID_ERR_MEC1_SORTERFAIL
Confirm the setting and press the release button.
E4310 FILM PICKUP ERROR.
Press release button and follow the direction provided.
E4311 ID_ERR_MEC1_FILMJAM
Press the release button and remove the film.
E4325 ID_ERR_MEC1_TRAY3OPEN
Close the tray and press the release button.
E4340 ID_ERR_MEC1_SORTERFAIL
Confirm the setting and press the release button.
E4341 ID_ERR_MEC1_SORTERFAIL
Confirm the setting and press the release button.
E4342 ID_ERR_MEC1_SORTERFAIL
Confirm the setting and press the release button.
E4410 ID_ERR_MEC1_FILMJAM
Press the release button and remove the film.
E4411 ID_ERR_MEC1_FILMJAM
Press the release button and remove the film.
E4412 ID_ERR_MEC1_FILMJAM
Press the release button and remove the film.
E4420 ERR_MEC1_OPEFAIL
Press the release button and check film path.
E4421 ERR_MEC1_OPEFAIL
Press the release button and check film path.
E4422 ERR_MEC1_OPEFAIL
Press the release button and check film path.
E4423 ERR_MEC1_OPEFAIL
Press the release button and check film path.
E4424 ERR_MEC1_OPEFAIL
Press the release button and check film path.
E4425 ERR_MEC1_OPEFAIL
Press the release button and check film path.
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
Error Descriptions
Failed to pick up in Tray1.
Film jam in Descent Transport Unit.
Supply Tray1 is open
Incorrect film size in Tray1.
(10in or 8in film loaded in 14in tray)
Incorrect film size in Tray1.
(Film other than 10in loaded in 10in tray)
Incorrect film size in Tray1.
(Film other than 8in loaded in 8in tray)
Pickup failed in Tray2.
Film jam in Descent Transport Unit.
Supply Tray2 is open.
Incorrect film size in Tray2.
(10in or 8in film loaded in 14in tray)
Incorrect film size in Tray2.
(Film other than 10in loaded in 10in tray)
Incorrect film size in Tray2.
(Film other than 8in loaded in 8in tray)
Pickup failed in Tray3.
Film jam in Descent Transport Unit.
Supply Tray3 is open
Incorrect film size in Tray3.
(10in or 8in film loaded in 14in tray)
Incorrect film size in Tray3.
(Film other than 10in loaded in 10in tray)
Incorrect film size in Tray3.
(Film other than 8in loaded in 8in tray)
Film jam in Descent Transport Unit.
Film jam in Descent Transport Unit.
Film jam in Descent Transport Unit.
In process of returning the Justification Motor to HP,
Justification Home Sensor was not activated.
In process of returning the Justification Motor to Limit Pos,
Justification Limit Sensor was not activated.
In process of releasing the Positioning Nip,
Positioning Nip Sensor was not activated.
In nip process of the Positioning Nip,
Sensor was not activated.
In process of releasing the Descent Nip,
Descent Nip Sensor was not deactivated.
In nip process of the Descent Nip,
Descent Nip sensor was not activated.
< 124 >
Reset
Refer to "Film Jam in the Supply Tray".
Refer to "Film Jam in the Descent Transport Unit".
Close the Supply Tray, and perform Error Reset.
Load the 14in film in the Supply Tray, and
perform Error Reset.
Load the 10in film in the Supply Tray, and
perform Error Reset.
Load the 8in film in the Supply Tray, and
perform Error Reset.
Refer to "Film Jam in the Supply Tray".
Refer to the "Film Jam in the Descent Transport Unit.
Close the Supply Tray, and perform Error Reset.
Load the 14in film in the Supply Tray, and
perform Error Reset.
Load the 10in film in the Supply Tray, and
perform Error Reset.
Load the 8in film in the Supply Tray, and
perform Error Reset.
Refer to "Film Jam in the Supply Tray".
Refer to "Film Jam in the Descent Transport Unit".
Close the Supply Tray, and perform Error Reset.
Load the 14in film in the Supply Tray, and
perform Error Reset.
Load the 10in film in the Supply Tray, and
perform Error Reset.
Load the 8in film in the Supply Tray, and
perform Error Reset.
Refer to "Film Jam in the Descent Transport Unit".
Refer to "Film Jam in the Descent Transport Unit".
Refer to "Film Jam in the Descent Transport Unit".
Refer to "Film Jam in the Descent Transport Unit".
Note : Film jam is suspected as the cause.
Refer to "Film Jam in the Descent Transport Unit".
Note : Film jam is suspected as the cause.
Refer to "Film Jam in the Descent Transport Unit".
Note : Film jam is suspected as the cause.
Refer to "Film Jam in the Descent Transport Unit".
Note : Film jam is suspected as the cause.
Refer to "Film Jam in the Descent Transport Unit".
Note : Film jam is suspected as the cause.
Refer to "Film Jam in the Descent Transport Unit".
Note : Film jam is suspected as the cause.