Touch Panel - Konica Minolta DRYPRO Model 793 Operation Manual

Ch.4 Maintenance Mode
4-4-13 TOUCH PANEL <OTHER SETUP>
Allows to set up the Touch Panel of the DRYPRO 793.
3
Upon touching the arrow [t], [s] buttons, actual back light intensity of the
Operation Panel changes. Change the back light intensity, and find the best intensi-
ty for your operation environment.
When "INTERVAL" is selected in the "ERROR
ALARM SETTING", a beep sound is released
intermittently.
When an error or "Film Empty" occurs, [BEEP
STOP] button appears on the Operation Panel.
Touch this button to stop the beep.
- [BEEP STOP] button will disappear when the
beep stops.
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
1
Switch to the Maintenance Mode.
2
Touch the [OTHER SETUP] button on the
"Maintenance" screen.
3
Touch the [TOUCH PANEL] button.
- "Touch Panel Setup" screen will be displayed.
- Touching the [RETURN] button will shut down the
"Maintenance Mode" and return to the Normal screen.
4
Touch the arrow buttons [t], [s] to select the
the luminance of the Back Light.
4
- Select from "1" through "5".
Greater the value, lighter the luminance, and smaller
the value, darker the luminance.
"1" : 70% of full luminance
"2" : 75% of full luminance
"3" : 80% of full luminance
"4" : 85% of full luminance
"5" : 90% of full luminance
- Touching the arrow [t], [s] buttons will vary the lumi-
nance.
5
Touch the arrow buttons [t], [s] to select the
the beep sound for the error.
- Upon touching the arrow [t][s] buttons will switch
among "Silent", "Single" and "Interval".
5
< 86 >
User Level
1 2 3
● ● ●
Disp
●
Ope
p.52 Switching to
the Mainte-
nance Mode