Shutdown - Konica Minolta DRYPRO Model 793 Operation Manual

Ch.3 Operation

3-3 Shutdown

How to shut down the DRYPRO 793 is detailed below.
There are two ways for shutting down the DRYPRO 793 as shown below.
1. Shutdown using the start timer for the next startup.
This is the shutdown procedure to automatically start up the device next time.
It is necessary to set using the maintenance mode in advance, the time when the device shall startup next time .
2. Shutdown without using the start timer.
This is the shutdown procedure to manually start up the device next time.
When the shutdown is performed with this procedure, the start timer is disabled even when it has been set
In normal operation, confirm that both "Print Queue" and "Copies" show "0".
Shutting down the device with the print data left in the print queue, the print data will be printed when the device is
started up next time.
1. Shutdown using the start timer
How to start up next time using the start timer is detailed below.
2
3
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
1
Confirm that "Printing" is not displayed in the
message column.
2
Touch the [Start Timer] button.
- "Start Timer Setup" screen will be displayed.
3
Touch the arrow buttons [t], [s] to select the
date & time when the device is started up next
time.
- Items to be changed are "y/m/d (day of the week)",
"HOUR", "MINUTE".
- Today through 8 days ahead can be set for "y/m/d (day
of the week)"
- "MINUTE" can be changed in 10-minute step.
< 31 >
p.31 Shutdown
without using
the start
timer
Start Timer
Allows the device to
start up using a timer
function. The device
can be set to become
ready to print at the pre-
set [day of the week],
[Hour].
p.82 Start timer
p.33 Cancelling
the sleep
mode