Paper Folding Start Position - Konica Minolta magicolor 8650 Service Manual

5. Operation
5.4.4

Paper folding start position

• Paper folding is created by the paper folding plate and the paper pressure plate. At the
same time when the folding rollers start to rotate, the paper pressure plate starts press-
ing the stack of paper to the contact area of the paper folding rollers.
• For half of the folding rollers, no rubber material is used except at the center and both
ends of the folding rollers. This half of the upper and the lower folding rollers, contacts
each other at the center and both ends, and is only used to transport the paper, thus pre-
venting wrinkles.
• The other half of the upper and the lower folding rollers, contacts each other completely,
thereby folding and then transporting the paper.
Upper folding roller
Lower folding roller
Paper pressure plate home position
The plate doesn't touch paper.
28
Bundle of paper
4583M633AA
Paper pressure plate start position
A0D6T2C002DA
Theory of operation Ver. 1.0 Nov. 2007
Paper pressure plate
Take-up entrance
Paper folding /transport
Paper transport
The plate pushes paper
A0D6T2C003DA