Film Jam In The Elevator Transport Unit - Konica Minolta DRYPRO Model 793 Operation Manual

Ch.6 Troubleshooting

6-3-3 Film Jam in the Elevator Transport Unit

Error codes "4511", "4610", "4620", "4621" indicate the jam in the Elevator Transport Unit.
Remove the jam film according to the following procedure.
1
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
1
Touch the [ERROR RESET] button.
- Front Bottom Cover opens.
- An animation showing the jam release procedures will
be displayed on the Operation Panel.
2
Press the Lever-C, and open the Right Cover.
3
When the jam film is located,pull it out by hand.
- When the removal of the jam film was successful, pro-
ceed to the step 6.
- When the jam film cannot be located, proceed to the
step 4.
< 136 >
Animation of Jam
Release in the Elevator
Transport Unit.
Animation of Jam
Release in the Elevator
Transport Unit.