Mammo Qc Print - Konica Minolta DRYPRO Model 793 Operation Manual

Ch.4 Maintenance Mode
4-4-6 MAMMO QC PRINT <PRINT SETUP>
Allows to print a Mammo QC pattern that is incorporated in the DRYPRO 793, and to be used for den-
sity control of the mammographic images.
How to print the Mammo QC pattern is detailed below.
Mammo QC pattern can be printed only when the Supply Tray for mammo film is
selected.
Description of [SUPPLY TRAY] button display
From the left, output tray information, that are "1: Tray No.", "2: Film Size",
"3: Film Type", "4: Copies" are displayed on the [SUPPLY TRAY] button.
In the Mammo QC print, selecting a film type other than mammo use and touching
the [PRINT] button will not print the Mammo QC pattern.
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
1
Switch to the Maintenance Mode.
2
Touch the [PRINT SETUP] button of the "Main-
tenance" screen.
3
Touch the [MAMMO QC PRINT] button.
- "Tray Select" screen will be displayed.
- Touching the [RETURN] button will exit the Mainte-
nance Mode, and return to the Normal screen.
3
4
Touch the arrow buttons [t], [s] to select the
tray for the film to be printed.
- Touching the [RETURN] button will return to the "Main-
4
tenance Mode (PRINT SETUP)" screen.
5
Touch the [PRINT] button.
- A message confirming the print of Mammo QC pattern will
be displayed.
5
< 66 >
User Level
1 2 3
● ● ●
Disp
● ● ●
Ope
p.52 Switching to
the Mainte-
nance Mode