Name Of Each Component; Ch.2 Product Outline - Konica Minolta DRYPRO Model 793 Operation Manual

Ch.2 Product Outline

2-1 Name of Each Component

Each component and its function of the DRYPRO 793 is detailed below.
2-1-1 Front and Left Side View
4) Exit Cover
5) Left Cover
1) Front Upper Cover
When a film jam occurs in HPRO(Hear Pro-
cessing Unit) - Cooling Unit, open this
cover and take the jammed film out. Also
open when the deodorant filter is replaced.
2) Supply1
(Standard : 1 trays, with option : max. 3 trays)
Load films in these trays.
3) Front Lower Cover
When a film jam occurs in Descent or Ele-
vator transport unit, or Film Justification
unit, open this cover and take the jammed
film out. Also it is possible to send the
jammed film to the left cover or right cover
accessing through this opening.
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
1) Front Upper Cover
2) Supply Tray 1
3) Front Lower Cover
4) Exit Cover
When a film jam occurs in Ejection Unit,
open this cover and take the jammed film
out.
5) Left Cover
When a film jam occurs in Descent Trans-
port unit, open this cover and take the
jammed film out. Also open when cleaning
of the cleaning roller is performed.
< 18 >
Film size for the
DRYPRO 793 can be
selected from 14"x17",
14"x14", 11"x14",
10"x12", 8"x10". Set up
of the film size selected
by the facility will be
made by the service
representative at the
time of installation of the
DRYPRO 793.
p.19 Operation
Panel
p.93 Front Cover
Open
p.24 Supply Tray
& Cutter
p.132 Film Jam in
the Descent
Transport Unit
p.95 Dust
Cleaning