Konica Minolta DRYPRO Model 793 Operation Manual page 40

Ch.3 Operation
14
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
14
Touch the [NEXT] button.
- An animation showing how to load the film package
(returning the Cutter ~ closing the tray) will be dis-
played.
15
Put the Cutter back in the Cutter Pocket. (3 in
the left fig.)
16
Push the Supply Tray back until it is locked.
- When the Supply Tray is fully pushed into its end, a
message "Tray initializing. Please wait" will be dis-
played.
- Upon receiving the print job after the film package has
been loaded, a film on which a calibration pattern is
printed will be output for automatic density correction.
- A message "READY" will be displayed on the Operation
Panel to allow print operation.
< 38 >
Animation of shutter
close ~ cutting light-
proof bag.
Upon completion of film
loading, the indication of
the loaded film sheets
will change from "0" to
"126".