Ch.3 Operation; Operation Panel - Konica Minolta DRYPRO Model 793 Operation Manual

Ch.3 Operation

3-1 Operation Panel

The operation, control and settings of this device can be made by using the control panel located on the main unit.
The following shows the operating procedures.
1) Message Column
4) Status Info.
1) Message Column : Displays the status of the DRYPRO 793.
Warming Up
Ready
Printing
Error
Error Reset
Maintenance
Web User Busy
2) Displays film type, size, number of remaining films in the Tray 1, 2, 3.
Size
14x17
14x14
11x14
10x12
8x10
Display changes as follows when the film is empty.
Touching the area where "Film Set" is displayed initiates the film loading sequence.
Display changes as follows when the density calibration is required.
(Note : depending on the calibration settings)
Touching the area where "Calibration" is displayed initiates the automatic density
calibration.
3) Job Info. : Copy Count at present waiting for printout.
Queues
Print Count
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
Warming up
Ready for print
In printing process
Error occurred
Error in reset process
Servicing in Maintenance Mode
Accessed by Web user
Film Type
B (blue) SD-P)
C (clear) (SD-PC)
M (mammo) (SD-PM)
The number of jobs waiting for printout.
Count of jobs in printing and unprinted.
5) [Start Timer] Button
Remaining
0-126
< 28 >
3) Job Info.
2) Loaded Film Info.
6) [Menu] Button
p.35 FILM
LOADING