Konica Minolta DRYPRO Model 793 Operation Manual page 51

Ch.4 Maintenance Mode
4-1-3 List of Maintenance Mode Functions
Following is the list of items that can be selected or practiced by each user level.
MENU
PRINT SETUP PRINT QUEUE INFO
(p.56)
PREVIOUS PRINT(p.57)
QUEUE CLEAR (p.61)
TEST PRINT (p.62)
CALIBRATION (p.64)
MAMMO QC PRINT
(p.64)
PRINT CONDITION
(p.68)
LUT SETUP (p.73)
FILM SETUP FILM DATA
(p.78)
FILM SETUP (p.80)
TIMER SETUP START TIMER (p.82)
TIME SET (p.84)
OTHER SETUPS TOUCH PANEL (p.86)
SLEEP MODE (p.88)
SORTER SETUP (p.90)
FRONT LOWER COVER
OPEN (p.93)
SYSTEM RESET
(p.94)
DUST CLEANING
(p.95)
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
ITEM USER LEVEL
1 2
▲ ▲
✕ ❍
✕ ✕
❍ ❍
❍ ❍
❍ ❍
▲ ▲
▲ ▲
▲ ▲
▲ ▲
▲ ▲
▲ ▲
▲ ▲
▲ ▲
▲ ▲
✕ ✕
✕ ✕
✕ ✕
(✕ : not displayed, ▲ : display only ❍ : can be altered)
DESCRIPTION
3
▲
Displays the job status (printed, printing, waiting)
❍
Delete the print data that is stored in the job folder.
❍
Reprint the print data that is stored in the DRYPRO
793.
❍
Prints a SMPTE pattern for density calibration of the
film.
❍
Prints a Calibration pattern for density correction of the
film.
❍
Prints a mammo QC pattern for density correction of the
film.
❍
Sets the print condition for each modality.
❍
Creates a LUT curve customized for the user, and
applies to the target diagnostic device.
▲
Displays the film collection data.
Classifies the film collection data by channel, film size,
film type, month/week/day.
❍
Set the film size, type, copies.
❍
Sets ON/OFF of each function, start timer time
when it is ON for each day of the week. Start timer
screen will be displayed.
❍
Sets the internal clock.
❍
Sets the backlight intensity of the Operation
Panel, type of error sound.
❍
Sets the Sleep Mode.
Sets ON/OFF and the time for the Sleep Mode of the
Touch Panel and the HPRO Drum.
❍
Sets the Sorter Unit attached to the DRYPRO 793. Sets
ON/OFF of the sorter, first bin selection, test print jam
film, discharge bin of the small size films (10", 8").
❍
Opens the Front Cover.
❍
Performs a cold start (reset) of the DRYPRO 793.
Restarting the DRYPRO 793 by system reset deletes all
data including unprinted data in the job folder, printed
data stored in the DRYPRO 793.
❍
Allows the dust cleaning before it reached regular dust
cleaning that is performed at every 2000 sheets.
< 49 >