Lut Setup - Konica Minolta DRYPRO Model 793 Operation Manual

Ch.4 Maintenance Mode
4-4-8 LUT SETUP <PRINT SETUP>
The DRYPRO 793 incorporates a library of LUTs that we recommends for various diag-
nostic devices. Selecting the LUT from this library, and applying it to each channel in
advance will instantly apply a suitable LUT to the diagnostic device connected to the chan-
nel.
3
5
4
6
7
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
1
Switch to the Maintenance Mode.
2
Touch the [PRINT SETUP] button of the "Main-
tenance" screen.
3
Touch the [LUT SETUP] button.
- "CH SELECT" screen will be displayed.
- Touching the [RETURN] button will cancel the Mainte-
nance Mode, and return to the Normal screen.
4
Scroll the page with the [SCROLL] buttons, and
display the button for the input device for which the
LUT should be set.
5
Touch the button for the input device for which the
LUT should be set.
- "LUT SETUP" screen will be displayed.
- Channel No.. and name of the input device selected will be
indicated at the upper left of each "LUT Setup" page.
- Touching the [RETURN] button will return to the "Mainte-
nance Mode (PRINT SETUP)" screen.
6
Touch the arrow buttons [t], [s] to select the
the LUT that should be edited.
- Selected LUT No.. and name will be displayed between
the arrow buttons [t], [s].
- Selected LUT name will be displayed to the right of the
right arrow [s] button.
7
Touch the [REFERENCE LIBRARY] button to
edit the new LUT based on the LUT library rec-
ommended by the manufacturer.
- "LUT LIBRARY" screen will be displayed.
- Step 7 through 10 can be skipped if the LUT displayed
in the screen should be edited. Proceed to the step 11.
< 73 >
User Level
1 2 3
● ● ●
Disp
●
Ope
p.52 Switching to
the Mainte-
nance Mode