Internal Structure - Konica Minolta DRYPRO Model 793 Operation Manual

Ch.2 Product Outline

2-2 Internal Structure

Internal structure of the DRYPRO 793 is outlined below.
A film is transported from 1) through 7) in sequence in print process.
10) Operation Panel
7) Cooling/Discharge
Unit
1) Supply Unit
2) Descent Transport
Unit
3) Justification Unit
1) Supply Unit (available to each Supply Tray)
Picks up films in the Supply Tray unit one by one, and sends it to the Descent Trans-
port unit.
2) Descent Transport Unit
Sends a film picked up at the Supply unit to the Justification unit.
3) Justification Unit
Aligns the right and left edge of the film sent from the Descent Transport unit, and
sends to the Exposure unit.
4) Exposure Unit (a: Sub-Scan Unit, b: Main Scan Unit)
Performs a laser scanning in synchronization with the film transport and prints an
image on the film.
5) Elevator Transport Unit
Sends the film to the HPRO (Heat Processing) unit after the exposure.
6) HPRO Unit
Processes the exposed film by heating.
7) Cooling/Discharge Unit
Cools the heat-processed film and discharges it.
8) Deodorant Filter
Removes the odor generated in heat processing. It is necessary to regularly change
the Deodorant Filter.
9) Electrical Components Unit
Consists of the power supply unit for supplying the power to the device and the control
unit for controlling the entire device, communicating with the diagnostic devices, and
processing / controlling images.
10) Operation Panel
Operates and makes settings of the DRYPRO 793.
11) Lis-793 (option)
Discharges the film discharged from the main body into the specified bin.
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
Film Pass
9) Electrical Unit (rear)
< 25 >
11) Lis-793
8) Deodorant Filter
6) H-PRO Unit
5) Elevator Transport
4) Exposure Unit
p.142 Replacement
of Deodorant
Filter
p.19 Operation
Panel