Page 1: Reference Guide
magicolor 5650EN/5670EN ® Reference Guide A0EA-9562-13A 1800857-001D...
Page 2: Copyright Notice
KONICA MINOLTA. The information contained in this guide is intended for use with the KONICA MINOLTA magicolor 5650EN/5670EN printers only.
Page 3: Software License Agreement
SOFTWARE LICENSE AGREEMENT This package contains the following materials provided by Konica Minolta Business Technolo- gies, Inc. (KMBT): software included as part of the printing system, the digitally-encoded machine-readable outline data encoded in the special format and in the encrypted form (“Font Programs”), other software which runs on a computer system for use in conjunction with the...
Page 4: About Adobe Color Profile
11. Notice to Government End Users: The Software is a “commercial item,” as that term is defined at 48 C.F.R.2.101, consisting of “commercial computer software” and “commercial computer software documentation,” as such terms are used in 48 C.F.R. 12.212. Consis- tent with 48 C.F.R.
Page 5 4. DISCLAIMER OF WARRANTY Adobe licenses the Software to you on an “AS IS” basis. Adobe makes no representation as to the adequacy of the Software for any particular pur- pose or to produce any particular result. Adobe shall not be liable for loss or damage aris- ing out of this Agreement or from the distribution or use of the Software or any other materials.
Page 6 9. GOVERNING LAW This Agreement will be governed by and construed in accordance with the substantive laws in force in the State of California as such laws are applied to agree- ments entered into and to be performed entirely within California between California resi- dents.
Page 7: Openssl Statement
5. All company names and product names used in this document is the trademarks or regis- tered trademarks of their respective holder. This ICC Profile made by GretagMacbeth ProfileMaker and granted TOYO INK certain license to distribute by GretagMacbeth AG. TOYO Offset Coated 2.1 ©...
Page 8: Original Ssleay License
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com). Original SSLeay License Copyright (c) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The imple- mentation was written so as to conform with Netscapes SSL.
Page 9: Netsnmp License
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SER- VICES;...
Page 10 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICU- LAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEM- PLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCURE- MENT OF SUBSTITUTE GOODS OR SERVICES;...
Page 11 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of condi- tions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Page 12 Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of condi- tions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Page 13: Table Of Contents
Contents 1 Operation on Mac OS X ..................1 System Requirements for the Printer Driver 2 Installing the Printer Driver 3 Installing Printer Driver Uninstalling the printer driver 9 For Mac OS X 10.2 For Mac OS X 10.3/10.4 For Mac OS X 10.5/10.6 Print Center Settings (Mac OS X 10.2.8) 11 When Using a USB Connection When Using a Network Connection...
Page 14 Rendezvous Setting 31 IP Printing Setting 33 Printer Setup Utility Settings (Mac OS X 10.4) 36 When Using a USB Connection When Using a Network Connection Bonjour Setting 38 AppleTalk Setting 41 IP Printing Setting 43 Printer Settings (Mac OS X 10.5/10.6) 47 When Using a USB Connection When Using a Network Connection Bonjour Setting 52...
Page 15 Paper Feed Cover Page Scheduler Color Options Advanced Color Options/Image Advanced Color Options/Text Advanced Color Options/Graphics Advanced Color Options/Simulation Printer Features Supply Levels Summary Specifying the Color Profile 107 Preparation Downloading Color Profiles Specifying Printer Driver Settings Troubleshooting 114 2 Operation on the XPS Driver for Windows ..........117 Installing the Printer Driver 118 Selecting Print Options/Defaults 125 Uninstalling the Printer Driver 128...
Page 16 Troubleshooting 152 4 Operation on NetWare ...................153 Printing With NetWare 154 Network Printing in a NetWare Environment For Remote Printer Mode With NetWare 4.x Bindery Emulation For Print Server Mode With NetWare 4.x Bindery Emulation For NetWare 4.x Remote Printer Mode (NDS) For NetWare 4.x/5.x/6 Print Server Mode (NDS) For NetWare 5.x/6 Novell Distributed Print Service (NDPS) Setting Up a Client (Windows) Settings When Using the NetWare...
Page 17 IPX/SPX 189 LPD/LPR 189 SLP 190 SMTP 190 SNMP 190 Port 9100 191 WSD print 191 Printing via IPP (Internet Printing Protocol) With Windows Server 2008/Server 2008 R2 192 Adding an IPP Port using the Printer Driver CD-ROM 192 Adding an IPP Port using Add Printer Wizard - Windows Server 2003/XP/2000 195 Adding an IPP Port using Add Printer Wizard - Windows Vista/7/Server 2008/Server 2008 R2 197...
Page 18 Viewing Printer Status 227 System Page Device Information 228 Counter 237 Online Assistance 238 User Authentication 239 Job Page Active Job List 241 Done Job List 242 Done Job List (Detail) 243 Print Page Default Settings 244 Font/Form 258 Report Types 262 Direct Print 263 Configuring the Printer 264 System Page...
Page 19 SSL/TLS 381 SSL/TLS Information 381 SSL/TLS Setting (When a certificate is not installed) 382 SSL/TLS Setting (When a certificate is installed) 383 Self-signed Certificate Setting 384 Request a certificate 386 Certificate Request 388 Install a Certificate 389 Encryption Strength Setting 390 Remove a Certificate 391 Mode Using SSL/TLS 392 Authentication 393...
Page 20 viii Contents...
Page 21: Operation On Mac Os X
Operation on Mac OS X...
Page 22: System Requirements For The Printer Driver
System Requirements for the Printer Driver Before installing the printer driver, make sure that your system meets the fol- lowing system requirements. Computer Apple Macintosh computer installed with the following processor: – PowerPC G3 or later processor (Pow- erPC G4 or later is recommended) –...
Page 23: Installing The Printer Driver
Driver CD-ROM (For Windows 7/Windows Server 2008 R2/Mac OS X 10.6). The printer driver for Mac OS X 10.5 can be downloaded from the KONICA MINOLTA web site. Double-click the CD icon on the desktop, and then double click the mc5670(5650) OSX Installer_103104.pkg package file.
Page 24 When using Mac OS X 10.5, double-click the mc5670(5650) OSX Installer_105.pkg package file icon. When using Mac OS X 10.3, double-click the mc5670(5650) OSX Installer_103104.pkg package file icon. When using Mac OS X 10.2, double-click the mc5670(5650) OSX Installer_102.pkg package file icon. Click Continue.
Page 25 Click Continue. Check the details of the license agreement, and then click Continue. Installing the Printer Driver...
Page 26 Click Agree in the confirmation dialog box if you agree to the terms of the license. In the Select a Destination page, select the disk in which you wish to install the software, and then click Continue. Installing the Printer Driver...
Page 27 Click Install in the Easy Install page. Installation starts. Enter the administrator user name and password in the Authenticate dia- log box, and then click OK. Installing the Printer Driver...
Page 28 After the installation has been completed, click Close. This completes the installation of the printer driver. Installing the Printer Driver...
Page 29: Uninstalling The Printer Driver
KONICA MINOLTA mc5670(5650)PS.gz Delete the unnecessary files from Library - Printers. – Drag the KONICA MINOLTA mc5670(5650) Color.plugin file, which is located in Library - Printers - PPD Plugins, to the Trash icon. – Drag the pstomc5670(5650)PS file, which is located in Library - Printers - KONICAMINOLTA - filter, to the Trash icon.
Page 30: For Mac Os X 10.5/10.6
The following procedure is not necessary; it is only for users who would like to delete unnecessary files. Drag the KONICA MINOLTA mc5670(5650)PS.gz file, which is located in Library - Printers - PPDs - Contents - Resources on the hard disk, to the Trash icon.
Page 31: Print Center Settings (Mac Os X 10.2.8)
Print Center Settings (Mac OS X 10.2.8) When Using a USB Connection Use a USB cable to connect the printer to your computer. Check that the printer is turned on, and then restart the computer. Open Print Center, which can be accessed by clicking Startup Disk, then Applications, then Utilities.
Page 32 If magicolor 5670(5650) does not appear, check that the printer is turned on and the USB cable is connected, and then restart the computer. Select KONICA MINOLTA from the Printer Model pop-up menu. Select KONICA MINOLTA mc5670(5650) PPD in the Model Name list. Print Center Settings (Mac OS X 10.2.8)
Page 33: When Using A Network Connection
Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 63. When Using a Network Connection The network connection settings can be specified in one of five ways: AppleTalk setting, Rendezvous setting, IP printing setting, IPP setting and Specifying Port 9100.
Page 34 Select AppleTalk from the pop-up menu. Select MC5670(5650)-xxxxxx. "XXXXXX" refers to the last six digits of the MAC address (in hexa- decimal). Select KONICA MINOLTA from the Printer Model pop-up menu. Print Center Settings (Mac OS X 10.2.8)
Page 35 Select KONICA MINOLTA mc5670(5650) PPD in the Name list. Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 63. Print Center Settings (Mac OS X 10.2.8)
Page 36: Rendezvous Setting
Rendezvous Setting Connect the printer to an Ethernet network. Open Print Center, which can be accessed by clicking Startup Disk, then Applications, then Utilities. Click Add in the Printer List. Select Rendezvous from the pop-up menu. Print Center Settings (Mac OS X 10.2.8)
Page 37 "xx:xx:xx" refers to the last six digits of the MAC address (in hexa- decimal). Select KONICA MINOLTA from the Printer Model pop-up menu. Select KONICA MINOLTA mc5670(5650) PPD in the Model Name list. Print Center Settings (Mac OS X 10.2.8)
Page 38: Ip Printing Setting
Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 63. IP Printing Setting Connect the printer to an Ethernet network. Open Print Center, which can be accessed by clicking Startup Disk, then Applications, then Utilities.
Page 39 Select IP Printing from the pop-up menu. Enter the IP address for the printer in the Printer's Address text box. Select KONICA MINOLTA from the Printer Model pop-up menu. Print Center Settings (Mac OS X 10.2.8)
Page 40 Select KONICA MINOLTA mc5670(5650) PPD in the Model Name list. Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 63. Print Center Settings (Mac OS X 10.2.8)
Page 41: Ipp Setting
IPP Setting Connect the printer to an Ethernet network. Open Print Center, which can be accessed by clicking Startup Disk, then Applications, then Utilities. In the Printer List, click Add while pressing the Option key in the key- board. Select Advanced from the pop-up menu. Print Center Settings (Mac OS X 10.2.8)
Page 42 Select Internet Printing Protocol (http) from the Device pop-up menu. Enter the name for the printer in the Device Name text box. In the Device URI text box, enter "http://<IP address>/ipp". Select KONICA MINOLTA from the Printer Model pop-up menu. Print Center Settings (Mac OS X 10.2.8)
Page 43 Select KONICA MINOLTA mc5670(5650) PPD in the Name list. Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 63. Print Center Settings (Mac OS X 10.2.8)
Page 44: Specifying Port 9100
Specifying Port 9100 Connect the printer to an Ethernet network. Open Print Center, which can be accessed by clicking Startup Disk, then Applications, then Utilities. In the Printer List, click Add while pressing the Option key in the key- board. Select Advanced from the pop-up menu.
Page 45 Select AppSocket/HP JetDirect from the Device pop-up menu. Enter the name for the printer in the Device Name text box. In the Device URI text box, enter "socket://<IP address>". Select KONICA MINOLTA from the Printer Model pop-up menu. Print Center Settings (Mac OS X 10.2.8)
Page 46 Select KONICA MINOLTA mc5670(5650) PPD in the Name list. Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 63. Print Center Settings (Mac OS X 10.2.8)
Page 47: Printer Setup Utility Settings (Mac Os X 10.3)
Printer Setup Utility Settings (Mac OS X 10.3) When Using a USB Connection Use a USB cable to connect the printer to your computer. Check that the printer is turned on, and then restart the computer. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities.
Page 48 Select KONICA MINOLTA mc5670(5650) PPD in the Model Name list. Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 63. Printer Setup Utility Settings (Mac OS X 10.3)
Page 49: When Using A Network Connection
When Using a Network Connection The network connection settings can be specified in one of three ways: AppleTalk Setting, Rendezvous setting and IP printing setting (IPP, LPD or Socket). AppleTalk Setting Connect the printer to an Ethernet network. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities.
Page 50 "XXXXXX" refers to the last six digits of the MAC address (in hexa- decimal). Select KONICA MINOLTA from the Printer Model pop-up menu. Select KONICA MINOLTA mc5670(5650) PPD in the Model Name list. Click Add. The new printer appears in the Printer List screen.
Page 51: Rendezvous Setting
Disk, then Applications, then Utilities. Click Add in the Printer List. Select Rendezvous from the pop-up menu. Select KONICA MINOLTA magicolor 5670(5650)(xx:xx:xx) in the Name list. "xx:xx:xx" refers to the last six digits of the MAC address (in hexa- decimal).
Page 52 Select KONICA MINOLTA from the Printer Model pop-up menu. Select KONICA MINOLTA mc5670(5650) PPD in the Model Name list. Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options”...
Page 53: Ip Printing Setting
IP Printing Setting Connect the machine to an Ethernet network. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities. Click Add in the Printer List. Select IP Printing from the pop-up menu. Printer Setup Utility Settings (Mac OS X 10.3)
Page 54 - For a port 9100 setup, select Socket/HP Jet Direct. Enter the IP address for the machine in the Printer Address text box. Select KONICA MINOLTA from the Printer Model pop-up menu. Printer Setup Utility Settings (Mac OS X 10.3)
Page 55 Select KONICA MINOLTA mc5670(5650) PPD in the Model Name list. Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 63. Printer Setup Utility Settings (Mac OS X 10.3)
Page 56: Printer Setup Utility Settings (Mac Os X 10.4)
Printer Setup Utility Settings (Mac OS X 10.4) When Using a USB Connection Use a USB cable to connect the printer to your computer. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities. In the Printer List, click Add.
Page 57 If magicolor 5670(5650) does not appear, check that the printer is turned on and the USB cable is connected, and then restart the computer. Check that KONICA MINOLTA mc5670(5650) PPD is selected in the Printer Using list. Click Add. The new printer appears in the Printer List screen.
Page 58: When Using A Network Connection
When Using a Network Connection The network connection settings can be specified in one of three ways: Bonjour Setting, AppleTalk setting and IP printing setting (IPP, LPD or Socket). Bonjour Setting Connect the printer to an Ethernet network. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities.
Page 59 Printer Name list. “xx:xx:xx” refers to the last six digits of the MAC address (in hexa- decimal). Check that KONICA MINOLTA mc5670(5650) PPD is selected in the Print Using list. Click Add. Printer Setup Utility Settings (Mac OS X 10.4)
Page 60 Select the appropriate settings in the Printer Memory, Storage, Paper Source Unit, Paper Source Unit 2, Output Tray and Duplex Unit according to your printer setup. Select Standard if the 500 sheet tray is installed for Paper Source Unit 2. Select MPC if the 250 sheet tray is installed for Paper Source Unit 2.
Page 61: Appletalk Setting
AppleTalk Setting Connect the printer to an Ethernet network. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities. Click Add in the Printer List. The detected printer appears in the Printer Browser. Printer Setup Utility Settings (Mac OS X 10.4)
Page 62 Select MC5670(5650)-xxxxxx in the Printer Name list. “xxxxxx” refers to the last six digits of the MAC address (in hexa- decimal). Check that KONICA MINOLTA mc5670(5650) PPD is selected in the Print Using list. Click Add. The new printer appears in the Printer List screen.
Page 63: Ip Printing Setting
IP Printing Setting Connect the printer to an Ethernet network. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities. Click Add in the Printer List. Click IP Printer. Printer Setup Utility Settings (Mac OS X 10.4)
Page 64 Select desired print protocol from the Protocol pop-up menu. - For an IPP setup, select Internet Printing Protocol - IPP. - For an LPD setup, select Line Printer Daemon - LPD. - For a port 9100 setup, select HP Jet Direct - Socket. Printer Setup Utility Settings (Mac OS X 10.4)
Page 65 Enter the IP address for the printer in the Address text box. For an IPP setup, “ipp” in the Queue text box. Check that KONICA MINOLTA mc5670(5650) PPD is selected in the Print Using list. Click Add. Printer Setup Utility Settings (Mac OS X 10.4)
Page 66 Select the appropriate settings in the Printer Memory, Storage, Paper Source Unit, Paper Source Unit 2, Output Tray and Duplex Unit according to your printer setup. Select Standard if the 500 sheet tray is installed for Paper Source Unit 2. Select MPC if the 250 sheet tray is installed for Paper Source Unit 2.
Page 67: Printer Settings (Mac Os X 10.5/10.6)
Printer Settings (Mac OS X 10.5/10.6) When Using a USB Connection Use a USB cable to connect the printer to your computer. Select System Preference from the Apple menu. Click Print & Fax. In the Print & Fax, click + button. Printer Settings (Mac OS X 10.5/10.6)
Page 68 The detected printer appears in the Printer Browser. Select KONICA MINOLTA magicolor 5670(5650) in the Printer Name list. If KONICA MINOLTA magicolor 5670(5650) does not appear, check that the printer is turned on and the USB cable is connected, and then restart the computer.
Page 69 Check that KONICA MINOLTA mc5670(5650) PPD is selected in the Printer Using list. Click Add and then, click Configure. Printer Settings (Mac OS X 10.5/10.6)
Page 70 Select the appropriate settings in the Printer Memory, Storage, Paper Source Unit, Paper Source Unit 2, Output Tray and Duplex Unit according to your printer setup. Select Standard if the 500 sheet tray is installed for Paper Source Unit 2. Select MPC if the 250 sheet tray is installed for Paper Source Unit 2.
Page 71 Click Continue. The new printer appears in the Printer List screen. Printer Settings (Mac OS X 10.5/10.6)
Page 72: When Using A Network Connection
When Using a Network Connection The network connection settings can be specified in one of three ways: Bon- jour Setting, AppleTalk setting and IP printing setting (IPP, LPD or Socket). Bonjour Setting Connect the printer to an Ethernet network. Select System Preference from the Apple menu. Click Print &...
Page 73 The detected printer appears in the Printer Browser. Select KONICA MINOLTA magicolor 5670(5650)(xx:xx:xx) in the Printer Name list. “xx:xx:xx” refers to the last six digits of the MAC address (in hexa- decimal). Printer Settings (Mac OS X 10.5/10.6)
Page 74 Check that KONICA MINOLTA mc5670(5650) PPD is selected in the Print Using list. Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 63.
Page 75: Appletalk Setting
AppleTalk Setting Connect the printer to an Ethernet network. Select System Preference from the Apple menu. Click Print & Fax. In the Print & Fax, click + button. Printer Settings (Mac OS X 10.5/10.6)
Page 76 The detected printer appears in the Printer Browser. Select MC5670(5650)-xxxxxx in the Printer Name list. “xxxxxx” refers to the last six digits of the MAC address (in hexa- decimal). Printer Settings (Mac OS X 10.5/10.6)
Page 77 Check that KONICA MINOLTA mc5670(5650) PPD is selected in the Print Using list. Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 63.
Page 78: Ip Printing Setting
IP Printing Setting Connect the printer to an Ethernet network. Select System Preference from the Apple menu. Click Print & Fax. In the Print & Fax, click + button. Printer Settings (Mac OS X 10.5/10.6)
Page 79 Click IP. Select desired print protocol from the Protocol pop-up menu. - For an IPP setup, select Internet Printing Protocol - IPP. - For an LPD setup, select Line Printer Daemon - LPD. - For a port 9100 setup, select HP Jet Direct - Socket. Printer Settings (Mac OS X 10.5/10.6)
Page 80 Enter the IP address for the printer in the Address text box. For an IPP setup, “ipp” in the Queue text box. Check that KONICA MINOLTA mc5670(5650) PPD is selected in the Print Using list. Click Add. Printer Settings (Mac OS X 10.5/10.6)
Page 81 Select the appropriate settings in the Printer Memory, Storage, Paper Source Unit, Paper Source Unit 2, Output Tray and Duplex Unit according to your printer setup. Select Standard if the 500 sheet tray is installed for Paper Source Unit 2. Select MPC if the 250 sheet tray is installed for Paper Source Unit 2.
Page 82 Click Continue. The new printer appears in the Printer List screen. Printer Settings (Mac OS X 10.5/10.6)
Page 83: Selecting Print Options
Selecting Print Options For Mac OS X 10.2/10.3/10.4 Open Printer Setup Utility (Print Center), which can be accessed by clicking Startup Disk, then Applications, then Utilities. Select this printer in the Printer List, and then select Show Info from the Printers menu.
Page 84 Select the appropriate settings in the Printer Memory, Storage, Paper Source Unit, Paper Source Unit 2, Output Tray and Duplex Unit according to your printer setup, and then click Apply Changes. Select Standard if the 500 sheet tray is installed for Paper Source Unit 2.
Page 85: For Mac Os X 10.5/10.6
For Mac OS X 10.5/10.6 Select System Preference from the Apple menu. Click Print & Fax. Select this printer in the Printer List, and then click Options & Supplies. Select Driver. Selecting Print Options...
Page 86 Select the appropriate settings in the Printer Memory, Storage, Paper Source Unit, Paper Source Unit 2, Output Tray and Duplex Unit according to your printer setup, and then click OK. Select Standard if the 500 sheet tray is installed for Paper Source Unit 2.
Page 87: Specifying Page Setup Settings
Specifying Page Setup Settings The following dialog box appears when Page Setup... is selected from the File menu in the application being used. Select Page Setup... from the File menu. The Page Setup dialog box appears. Select this printer in the Format for pop-up menu. You can select the following sections from the Settings pop-up menu.
Page 88: Page Attributes Options
Page Attributes Options The Page Attributes section is used to specify the settings for the paper size, scaling, and print orientation. Paper Size Select the desired paper size from the Paper Size pop-up menu. Orientation Select either a vertical or horizontal page orientation for printouts. Scale If you want to enlarge or reduce the size of the printout, enter the scale ratio here (25-400%)
Page 89: Custom Paper Size Options
Custom Paper Size Options You can also specify a paper size that is not listed in the Paper Size pop-up menu. Select Manage Custom Sizes from the pop-up-menu, in the Page Setup dialog box. The Custom Page Sizes dialog box appears. Click this button to create a new custom paper size.
Page 90: Print Dialog Box
Specifying Print Settings (Mac OS X 10.4) The following dialog box appears when Print... is selected from the File menu in the application being used. Select Print... from the File menu. The Print dialog box appears. Select this printer in the Printer pop-up menu. The Print dialog box is used to specify the following print options.
Page 91: Common Buttons
Section Description Paper Feed This section contains paper feed options. Color Options This section contains options for color print- ing. Printer Features This section contains options for specifying whether or not paper of the nearest size is automatically detected when no paper tray is loaded with paper of the same size as the document and for specifying how the back of the paper is printed.
Page 92: Copies & Pages
Copies & Pages The Copies & Pages section is used to specify the number of copies to print and the range of pages to print. Copies This specifies the number of copies to be printed. If the Collated check- box is selected, all pages in the documents are printed as sets of print- outs.
Page 93: Layout
Layout The Layout section is used to specify the page layout when printing and the setting for double-sided printing. Pages per Sheet Specifies the number of pages to be printed on one sheet of paper. For example, if 2 is selected, two pages are printed on one sheet of paper. Layout Direction If you are printing more than one page per sheet, this specifies the direc- tion and order the pages should be arranged on each sheet of paper.
Page 94: Scheduler
To print on both sides of the paper, Duplex Unit must be selected under Installable Options (p. 64). The Long-edged biding check box or Short-edged biding check box can be selected even when the Duplex Unit is not installed. How- ever, in this case, the print job will be cancelled.
Page 95: Paper Handling
Paper Handling The Paper Handling section is used to specify the pages that are to be printed and the order in which the pages are printed. Page Order Automatic: Select this option to print in the original page order of the doc- ument.
Page 96: Colorsync
ColorSync Color Conversion Allows you to select host-based color matching or printer-based color matching. Quartz Filter Allows you to select Quartz Filter. Cover Page Print Cover Page Allows you to set cover page before or after document. Cover Page Type Allows you to select cover page type.
Page 97: Error Handling
Billing Info Allows you to set billing information printed on cover page. Error Handling PostScript Errors Allows you to select whether or not a report is outputted when a PostScript error occurs. Tray Switching This feature is not available with this printer. Specifying Print Settings (Mac OS X 10.4)
Page 98: Paper Feed
Paper Feed The Paper Feed section is used to specify the paper feed setting. All pages from All pages in the document are printed using the paper in the specified paper tray. First page from The first page of the document is printed on paper from a paper tray differ- ent from the tray used to print the rest of the document.
Page 99: Color Options
Color Options Quick Color Allows you to select a color preset. Brightness Allows you to set Brightness. Color as Grayscale Allows you to set Grayscale color. Color Separation Allows you to set Color Separation. Economy Print Allows you to set Economy Print Mode. Edge Strength Allows you to select Edge Strength.
Page 100: Advanced Color Options/Image
Advanced Color Options/Image RGB Source Allows you to select RGB color profiles for images. RGB Intent Allows you to select color intent for RGB images. RGB Gray Treatment Allows you to select RGB gray treatment for images. Destination Profile Allows you to select Destination Profile for images. Halftone Allows you to select halftone for images.
Page 101: Advanced Color Options/Text
Download Manager Click this button to start up the installed Download Manager. In order to start up Download Manager from the Advanced Color Options pane, Download Manager must be copied into the folder at the path Application\Download Manager mc5670(mc5650). After cre- ating the folder “Download Manager mc5670(mc5650)”...
Page 102: Advanced Color Options/Graphics
Edge Enhancement Allows you to select Edge Enhancement for text. Hide Advanced Options Click this button to hide the Advanced Color Options pane and display the Color Options pane. Manage Profile Click this button to display the Color Profile Management dialog box. From this dialog box, color profiles can be added or deleted to those avail- able as settings for RGB Source, Destination Profile and Simulation Profile of the Advanced Color Options pane.
Page 103 RGB Intent Allows you to select color intent for RGB graphics. RGB Gray Treatment Allows you to select RGB gray treatment for graphics. Destination Profile Allows you to select Destination Profile for graphics. Halftone Allows you to select halftone for graphics. Edge Enhancement Allows you to select Edge Enhancement for graphics.
Page 104: Advanced Color Options/Simulation
Advanced Color Options/Simulation Simulation Profiles Allows you to select color profiles for simulation. Match Paper Color Allows you to set Match Paper Color. CMYK Gray Treatment Allows you to select Simulation gray treatment. Hide Advanced Options Click this button to hide the Advanced Color Options pane and display the Color Options pane.
Page 105: Printer Features
In order to start up Download Manager from the Advanced Color Options pane, Download Manager must be copied into the folder at the path Application\Download Manager mc5670(mc5650). After cre- ating the folder “Download Manager mc5670(mc5650)” in the “Appli- cation” folder, copy Download Manager into the created folder. Printer Features Basic 1 Nearest Size and Scale...
Page 106 Basic 2 Collate Select whether or not to use the collate function. If the staple finisher is installed, refer to “Selecting Print Options” on page 63 to specify settings for the staple finisher. If the settings are not specified, Offset, Staple and Output Tray are not available. Specifying Print Settings (Mac OS X 10.4)
Page 107: Supply Levels
Supply Levels The Supply Levels section provides information for checking the amount of service life remaining on each consumable. The Supply Levels section appears when a printer is created on Mac OS X 10.4 with a Bonjour, IPP, LPD, Socket connection. The Supply Levels section may not appear depending on the applica- tion you use.
Page 108: Summary
Summary The Summary is used to check the currently selected print settings. Specifying Print Settings (Mac OS X 10.4)
Page 109: Specifying Print Settings (Mac Os X 10.5/10.6)
Specifying Print Settings (Mac OS X 10.5/ 10.6) The following dialog box appears when Print... is selected from the File menu in the application being used. Select Print... from the File menu. The Print dialog box appears. Select this printer in the Printer pop-up menu. The Print dialog box is used to specify the following print options.
Page 110: Common Buttons
Section Description Cover Page This section contains options for specifying cover page settings. Scheduler This section contains options for specifying the print timing and priority of jobs. Color Options This section contains options for color print- ing. Printer Features This section contains options for specifying whether or not paper of the nearest size is automatically detected when no paper tray is loaded with paper of the same size as the...
Page 111: Textedit
In order to use the collate function, the optional hard disk kit or a Com- pactFlash card of 1 GB or more must be installed. If a collate function is provided with the application, the setting specified from the applica- tion is given priority, and the setting specified in the printer driver is ignored.
Page 112: Layout
Layout The Layout section is used to specify the page layout when printing and the setting for double-sided printing. Pages per Sheet Specifies the number of pages to be printed on one sheet of paper. For example, if 2 is selected, two pages are printed on one sheet of paper. Layout Direction If you are printing more than one page per sheet, this specifies the direc- tion and order the pages should be arranged on each sheet of paper.
Page 113: Color Matching
To print on both sides of the paper, Duplex Unit must be selected under Driver (p. 66). The Long-edged biding check box or Short-edged biding check box can be selected even when the Duplex Unit is not installed. How- ever, in this case, the print job will be cancelled. Reverse Page Orientation The printing direction is inverted vertically.
Page 114: Paper Handling
Paper Handling The Paper Handling section is used to specify the pages that are to be printed and the order in which the pages are printed. Pages To Print All pages: Select this option to print all pages. Odd Only: Select this option to print only the pages with odd page num- bers.
Page 115: Paper Feed
Paper Feed The Paper Feed section is used to specify the paper feed setting. All pages from All pages in the document are printed using the paper in the specified paper tray. First page from The first page of the document is printed on paper from a paper tray differ- ent from the tray used to print the rest of the document.
Page 116: Cover
Cover Page Print Cover Page Allows you to set cover page before or after document. Cover Page Type Allows you to select cover page type. Billing Info Allows you to set billing information printed on cover page. Specifying Print Settings (Mac OS X 10.5/10.6)
Page 117: Scheduler
Scheduler The Scheduler section is used to specify the timing and priority for printing jobs. Print Document Now: Select this option to begin printing immediately. Specify the time to begin printing. On Hold: Select this option to hold the print job. Priority Select the priority for printing jobs that are being held.
Page 118: Color Options
Color Options Quick Color Allows you to select a color preset. Brightness Allows you to set Brightness. Color as Grayscale Allows you to set Grayscale color. Color Separation Allows you to set Color Separation. Economy Print Allows you to set Economy Print Mode. Edge Strength Allows you to select Edge Strength.
Page 119: Advanced Color Options/Image
Advanced Color Options/Image RGB Source Allows you to select RGB color profiles for images. RGB Intent Allows you to select color intent for RGB images. RGB Gray Treatment Allows you to select RGB gray treatment for images. Destination Profile Allows you to select Destination Profile for images. Halftone Allows you to select halftone for images.
Page 120: Advanced Color Options/Text
Advanced Color Options/Text RGB Source Allows you to select RGB color profiles for text. RGB Intent Allows you to select color intent for RGB text. RGB Gray Treatment Allows you to select RGB gray treatment for text. Destination Profile Allows you to select Destination Profile for text. Halftone Allows you to select halftone for text.
Page 121: Advanced Color Options/Graphics
Advanced Color Options/Graphics RGB Source Allows you to select RGB color profiles for graphics. RGB Intent Allows you to select color intent for RGB graphics. RGB Gray Treatment Allows you to select RGB gray treatment for graphics. Destination Profile Allows you to select Destination Profile for graphics. Halftone Allows you to select halftone for graphics.
Page 122: Advanced Color Options/Simulation
Advanced Color Options/Simulation Simulation Profiles Allows you to select color profiles for simulation. Match Paper Color Allows you to set Match Paper Color. CMYK Gray Treatment Allows you to select Simulation gray treatment. Hide Advanced Options Click this button to hide the Advanced Color Options pane and display the Color Options pane.
Page 123: Printer Features
Printer Features Basic 1 Nearest Size and Scale If no paper tray contains paper of the specified size, the page is automati- cally enlarged or reduced and paper of the most appropriate size is selected. Manually Print on 2nd Side This feature must be set when you set paper already printed on the front side.
Page 124 Basic 2 Collate Select whether or not to use the collate function. If the staple finisher is installed, refer to “Selecting Print Options” on page 63 to specify settings for the staple finisher. If the settings are not specified, Offset, Staple and Output Tray are not available. Specifying Print Settings (Mac OS X 10.5/10.6)
Page 125: Supply Levels
Supply Levels The Supply Levels section provides information for checking the amount of service life remaining on each consumable. The Supply Levels section appears when a printer is created on Mac OS X 10.5/10.6 with a Bonjour, IPP, LPD, Socket connection. The Supply Levels section may not appear depending on the applica- tion you use.
Page 126: Summary
Summary The Summary is used to check the currently selected print settings. Specifying Print Settings (Mac OS X 10.5/10.6)
Page 127: Specifying The Color Profile
Specifying the Color Profile Use Download Manager to download any color profile to the hard disk or the CompactFlash card of the machine. By adding color profiles to the printer driver, printing can be performed by specifying any color profile. The procedure for specifying the color profile on Mac OS X 10.4 is described below.
Page 128 Click Download, and then select Disk or Flash beside Location. Click Browse, and then select the color profile to be downloaded. File names for color profiles should be in the following format: 8 or less ASCII characters + 3 or less ASCII extension characters. Click Download Profile.
Page 129: Specifying Printer Driver Settings
Click OK. Click Exit. Next, specify the printer driver settings. Specifying Printer Driver Settings Add the color profile to the printer driver. Display the Print dialog box for the application. Select Color Options. Specifying the Color Profile...
Page 130 Select Custom beside Quick Color, and then click Advanced Color Options. Click Manage Profile. Specifying the Color Profile...
Page 131 From Profile List, select the type of profile to use. For an IPP (Internet Printing Protocol), LPD (Line Printer Daemon) or Socket/HP JetDirect (Port 9100) connection, continue with step Specifying the Color Profile...
Page 132 Select the color profile to use from the list, and then click Add. Click OK. Specifying the Color Profile...
Page 133 Select Simulation. Select the added color profile before printing. Specifying the Color Profile...
Page 134: Troubleshooting
Troubleshooting Symptom Solution The setting in the saved Depending on the functions selected for the presets are not applied. printer, some preset settings are not saved. Media type error appears. If a media type, such as “Transparency,” is specified for Tray 1, Tray 2, Tray 3 or Tray 4, a media type error appears and the printer stops.
Page 135 Symptom Solution The specified name can- Due to the limitations of Mac OS X, the follow- not be used for the name of ing names cannot be used as custom paper a custom paper size. size names. Specify a different name. “Custom”...
Page 136 Troubleshooting...
Page 137: Operation On The Xps Driver For Windows
Operation on the XPS Driver for Windows...
Page 138: Installing The Printer Driver
Installing the Printer Driver For the system requirements for the printer driver, refer to the User’s Guide on the Utilities and Documentation CD-ROM. You must have administrator privileges in order to install the printer driver. Before proceeding with the installation, be sure to exit all running applications.
Page 139 Select the connection type according to the environment. For a local connection: Click Use an existing port, and then select LPT1 or USB001. For a network connection: Click Create a new port, and then select Stan- dard TCP/IP port. Click Next. If a network connection was selected, continue with step 7.
Page 140 Select TCP/IP Device in the Device type list and type the IP address for the printer in the Hostname or IP address text box, and then click Next. Installing the Printer Driver...
Page 141 Choose Have Disk, locate the directory on the CD-ROM where the printer driver files are located, and then choose OK. The XPS printer driver is available in the corresponding “Driv- ers\XPS\<language>” folder on the CD-ROM. Use the appropriate XPS printer driver for the language. Installing the Printer Driver...
Page 142 Click Next. Click Next. Installing the Printer Driver...
Page 143 Select whether the printer driver is to be shared, and then click Next. Installing the Printer Driver...
Page 144 Click Finish. This completes the installation of the printer driver. Installing the Printer Driver...
Page 145: Selecting Print Options/Defaults
Before proceeding with the installation, be sure to exit all running applications. Click Start, click Control Panel, and then click Printers. Right-click the KONICA MINOLTA magicolor 5670(5650) XPS printer icon, and then click Properties. Select the Device Settings tab. From the Installable Options list, select the appropriate settings in the Paper Source Unit, Paper Source Unit 2, Storage, Output Tray Unit, Duplex Unit and Printer Memory according to your printer setup.
Page 146 Select the General tab. Click Printing Preferences. Selecting Print Options/Defaults...
Page 147 Select the default settings for your printer, such as the default media for- mat you use, on the appropriate tabs. Click Apply. Click OK to exit from the Print Preference dialog box. Click OK to exit from the Properties dialog box. Selecting Print Options/Defaults...
Page 148: Uninstalling The Printer Driver
Click Yes to verify the driver deletion. Right-click in the Printer window, and then click Server Properties. Click the Drivers tab. From the Installed printer drivers list, select “KONICA MINOLTA magi- color 5670(5650) XPS”, and then click Remove. Select the deleting method, and then click OK.
Page 149: Specifying Printer Driver Settings
Specifying Printer Driver Settings Click Start, click Control Panel, and then click Printers. Right-click the KONICA MINOLTA magicolor 5670(5650) XPS printer icon, and then click Printing Preferences. Common buttons Click to exit the Properties dialog box, saving any changes made.
Page 150: Advanced Options
Advanced Options Paper Size Select the output media size. Copy Count Specify the number of copies. Manually Print on 2nd side Print on the back side of paper that has already been printed on. Output Tray Select the output tray for the staple finisher. Offset Turn on/off offset.
Page 151: Paper/Quality
Image/Text/Graphics Halftone Select halftone for images/text/graphics. Image/Text/Graphics Edge Enhancement Select Edge Enhancement for images/text/graphics. Edge Strength Set the edge strength to Low, Middle or High. Glossy Mode Turn on/off glossy mode. Economy Print Select whether or not economy printing is used. Simulation Profile Specify a related profile.
Page 152 Specifying Printer Driver Settings...
Page 153 Operation on Linux...
Page 154: System Requirements For The Printer Driver
System Requirements for the Printer Driver Before installing the printer driver, make sure that your system meets the fol- lowing system requirements. Operating systems Red Hat Linux 9.0, SuSE Linux 8.2 Connecting the computer USB connection, Parallel connection, Net- and printer work connection (10Base-T/100Base-TX/ 1000Base-T) More than OS recommendation (128 MB or...
Page 155: Installing Ppd File From The Command Line
Installing PPD File From the Command Line Before proceeding with the installation, be sure to exit all running applications. Root privileges are required in order to install ppd file. Copy the ppd file from the Printer Driver CD-ROM to the “/usr/share/cups/ model”...
Page 156: Adding The Printer
Adding the Printer After copying the PPD file, be sure to restart CUPS. Start up the Web browser. Enter the URL “http://localhost:631”, and then click Manage Printers. The CUPS Administration Web page appears. Click Add Printer. A pop-up window appears. Enter the user name and password for using root privileges, and then click OK.
Page 157 Printer Hostname>[:port] Example: Using Printer IP - socket:/ /192.168.1.2:9100 Using printer Hostname - socket://Hostname:9100 Hostname may be substi- tuted by IP Address, and Port is an optional. Click Continue. Select KONICA MINOLTA, and then click Continue. Adding the Printer...
Page 158 Select KONICA MINOLTA mc5670(5650) PPD (en), and then click Continue. The following message appears. Adding the Printer...
Page 159: Specifying Printer Driver Settings
Specifying Printer Driver Settings Displaying the Settings Page Start up the Web browser. Enter the URL “http://local- host:631”, and then click Manage Printers. Printer on localhost.local- domain window appears. Click Configure Printer. The printer driver settings page appears. Specifying Printer Driver Settings...
Page 160: Printer Driver Settings
Printer Driver Settings Extra Parameters Settings Brightness Specifies the brightness of the image as -15%, -10%, -5%, 0%, 5%, 10%, or 15%. The default setting is 0%. Color Separation Specifies the color separation as On or Off. The default setting is Off. Economy Print Select whether or not economy printing is used.
Page 161: General
Parameters Settings Select Color Specifies the color for printing as Color or Grayscale. The default setting is Color. Staple Select whether or not to staple with the staple finisher. The default setting is Off. General Parameters Settings Collate If On is selected, all pages in the documents are printed as sets of printouts.
Page 162: Graphics Options
Graphics Options Parameters Settings Graphics Edge Enhance- Select whether graphic edges are empha- ment sized. The default setting is On. Graphics Halftone Specifies the halftone for graphic as Line Art, Detail or Smooth. The default setting is Detail. Graphics RGB Gray Treat- Specifies the RGB Gray Treatment as Com- ment posite Black, Black and Gray, or Black...
Page 163: Options Installed
Parameters Settings Image RGB Intent Specifies RGB intent for image as Vivid, Photographic, Relative Color, or Absolute Color. The default setting is Photographic. Image RGB Source Specifies RGB source for image as None, sRGB, Adobe RGB (1998), Apple RGB, ColorMatch RGB, or Blue Adjust RGB. The default setting is sRGB.
Page 164: Simulation
Simulation Parameters Settings CMYK Gray Treatment Specifies simulation gray treatment as Com- posite Black, Black and Gray, or Black Only. The default setting is Composite Black. Match Paper Color Specifies the Match Paper Color. The default setting is Off. Simulation Profile Specifies the simulation profile as None, SWOP, Euroscale, Commercial Press, DIC, or TOYO.
Page 165: Banners
Banners Parameters Settings Starting Banner Specifies the starting banner as none, clas- sified, confidential, secret, standard, topsecret, or unclassified. The default setting is none. Ending Banner Specifies the ending banner as none, classi- fied, confidential, secret, standard, topsecret, or unclassified. The default setting is none.
Page 166: Printing A Document
Printing a Document The contents and available options that appear in the print dialog box may vary depending on the application being used. Example Using LPR Command With applications other than OpenOffice, the following print dialog box appears. Click Properties in the Print dialog box.
Page 167: Example Using Openoffice
Example Using OpenOffice The procedure for printing on Red Hat 9 with OpenOffice 1.0.2 is described below. The following procedure or some steps may be dif- ferent depending on the version of the operating system being used. First, use M5670(5650)PX.ppd to add the printer to the system. For details on adding a printer to the system, refer to “Installing PPD File From the Command Line”...
Page 168 Click Import. Click Browse. Driver Installation dialog box appears. In the Path, enter “/usr/ share/cups/model”. In the Selection of drivers list, select KONICA MINOLTA mc5670(5650) OpenOffice PPD, and then click OK. Printing a Document...
Page 169 In the Please select a suit- able driver list, select KON- ICA MINOLTA mc5670(5650) OpenOffice PPD, and then click Next. Select the command to be displayed in the list, then click Next. Change the printer name. Click Finish. The Printer Administration dialog box appears again. Click Close.
Page 170 Click Print in the File menu. The Print dialog box appears. Select the name of the printer specified in the Ope- nOffice printer settings. Click OK. The kprinter Print dialog box appears. Printing a Document...
Page 171: Checking Print Jobs
Checking Print Jobs You can check the status of print jobs from a Web browser. Start up the Web browser. Enter the URL “http://local- host:631”. The CUPS Administration Web page appears. Click Manage Jobs. A list of the currently active print jobs appear.
Page 172: Troubleshooting
Troubleshooting Symptom Action The printer stops because The job may have been sent with a prohibited of a paper size error or a combination of settings (for example, for the paper type error. paper size and media type). Printing is not possible with postcards or overhead projector transparencies if Plain Paper is selected.
Page 173: Operation On Netware
Operation on NetWare...
Page 174: Printing With Netware
Printing With NetWare The printer controller supports the following environments. Network Printing in a NetWare Environment NetWare Version Protocol Used Emulation Service Mode NetWare 4.x Bindery/NDS Pserver/Nprinter NetWare 5.x/6 Pserver TCP/IP NDPS(lpr) For Remote Printer Mode With NetWare 4.x Bindery Emulation Before using bindery emulation, check that bindery emulation is com- patible with the NetWare server.
Page 175 In Administrator mode of PageScope Web Connection, select NetWare from the Network tab, and then specify the following settings. – NetWare Print: Select Enable. – Frame Type: Select Auto. (Select the frame type according to the network envi- ronment.) – Mode: Select NPrinter/RPrinter.
Page 176: For Print Server Mode With Netware 4.X Bindery Emulation
For Print Server Mode With NetWare 4.x Bindery Emulation Before using bindery emulation, check that bindery emulation is com- patible with the NetWare server. From a client computer, log on with Supervisor permissions to access the NetWare server where the Pserver is registered. Start up Pconsole.
Page 177: For Netware 4.X Remote Printer Mode (Nds)
– Frame Type: Select Auto. (Select the frame type according to the network envi- ronment.) – Mode: Select PServer. – Print Server Name: Specify the print server name created in step 4. – Print Server Password: Specify only when setting from the NetWare server. –...
Page 178 In Administrator mode of PageScope Web Connection, select NetWare from the Network tab, and then specify the following settings. – NetWare Print: Select Enable. – Frame Type: Select Auto. (Select the frame type according to the network envi- ronment.) – Mode: Select NPrinter/RPrinter.
Page 179: For Netware 4.X/5.X/6 Print Server Mode (Nds)
For NetWare 4.x/5.x/6 Print Server Mode (NDS) To use the Print Server mode, the IPX protocol must be loaded on the NetWare server. Log on to NetWare as an administrator from a client computer. Start up NWadmin. Select either the organization or organizational unit container that offers the print service, and then click Print Services Quick Setup (non-NDPS) on the Tools menu.
Page 180: For Netware 5.X/6 Novell Distributed Print Service (Ndps)
– Frame Type: Select Auto. (Select the frame type according to the network envi- ronment.) – Mode: Select PServer. – Print Server Name: Specify the print server name created in step – Print Server Password: Specify only when setting from the Net-Ware server.
Page 181: Setting Up A Client (Windows) Settings When Using The Netware Server
In the Gateway Types, select Novell Printer Gateway, and then register In the Configure Novell PDS for Printer Agent window, select (None) for the printer type and Novell Port Handler for the port handler type, and then register the settings. In Connection type, select Remote (LPR on IP), and then register it.
Page 182 Printing With NetWare...
Page 183: Printer Utilities
Printer Utilities...
Page 184: Installing Printer Utilities On Windows
Installing Printer Utilities on Windows You must have administrator privileges in order to install the Printer Utilities. If the User Account Control window appears when installing on Win- dows Vista, click the Allow button or the Continue button. Before proceeding with the installation, be sure to exit all running applications.
Page 185: Understanding The Ethernet Configuration Menus
Understanding the Ethernet Configuration Menus...
Page 186: Ethernet Menu
Ethernet Menu Location within the Configuration Menu PROOF/ READY PRINT PRINT MENU PAPER MENU QUALITY MENU MEMORY DIRECT CAMERA DIRECT INTERFACE JOB TIME- MENU ENABLE ETHERNET TCP/IP MEMORY DIRECT ADDRESS SUBNET CAMERA MASK DIRECT DEFAULT GATEWAY DHCP BOOTP ARP/PING DEFAULT MAINTE- HTTP ENABLE...
Page 187 TELNET BONJOUR ENABLE DYNAMIC ENABLE ENABLE ENABLE RAW PORT BIDIREC- TIONAL ENABLE SMTP ENABLE SNMP ENABLE WSD PRINT ENABLE IPSEC ENABLE ACCESS PERMISSION IP ADDRESS FILTER ACCESS REFUSE IPv6 ENABLE AUTO NETWARE ENABLE SETTING LINK LOCAL APPLETALK ENABLE GLOBAL ADDRESS SPEED/ DUPLEX GATEWAY...
Page 188: Accessing The Ethernet Menu
Accessing the Ethernet Menu Use the following series of keystrokes at the printer to access the Ethernet menu options on your printer. This menu provides access to all of the config- urable network items. Press this (until) the message window reads. . . key .
Page 189 NETWARE - ENABLE IEEE802.1X - ENABLE Ethernet Menu...
Page 190: Using The Network Menu Options
Using the Network Menu Options If the printer is connected to a network, the following settings should be spec- ified. For details about each setting, contact your network administrator. When manually setting the IP address, Subnet Mask, and Gateway turn off DHCP first. TCP/IP ENABLE Purpose...
Page 191 DEFAULT GATEWAY Purpose Sets the address of the router/gateway if a router/gateway is used on your network and you allow users outside your network environment to print on your printer. Range 0–255 for each xxx triplet Use the Up and Down keys to increase or decrease each number;...
Page 192 HTTP – ENABLE Purpose Select whether or not to enable HTTP. If YES is selected, HTTP is enabled. If NO is selected, HTTP is disabled. Options Default FTP – ENABLE Purpose Select whether or not to enable FTP. If YES is selected, FTP is enabled. If NO is selected, FTP is disabled.
Page 193 DYNAMIC DNS – ENABLE Purpose Select whether or not to enable Dynamic DNS. If YES is selected, Dynamic DNS is enabled. If NO is selected, Dynamic DNS is disabled. Options Default IPP – ENABLE Purpose Select whether or not to enable IPP. If YES is selected, IPP is enabled.
Page 194 SLP – ENABLE Purpose Select whether or not to enable SLP. If YES is selected, SLP is enabled. If NO is selected, SLP is disabled. Options Default SMTP – ENABLE Purpose Select whether or not to enable SMTP. If YES is selected, SMTP is enabled. If NO is selected, SMTP is disabled.
Page 195 IPSEC – ENABLE Purpose Select whether or not to enable IPsec. If YES is selected, IPsec is enabled. If NO is selected, IPsec is disabled. Options Default IP ADDRESS FILTER – ACCESS PERMISSION Purpose Select whether or not to enable Access Permission trans- missions.
Page 196: Netware
IPv6 – ENABLE Purpose Select whether or not to enable IPv6. If YES is selected, IPv6 is enabled. If NO is selected, IPv6 is disabled. Options Default IPv6 – AUTO SETTING Purpose Select whether or not to enable Auto Setting. If YES is selected, Auto Setting is enabled.
Page 197: Appletalk
APPLETALK ENABLE Purpose Select whether or not to enable AppleTalk. If YES is selected, AppleTalk is enabled. If NO is selected, AppleTalk is disabled. Options Default SPEED/DUPLEX Purpose Specifies the transmission speed for the network and the transmission method for bi-directional transmission. Options AUTO 10BASE FULL...
Page 198 Ethernet Menu...
Page 199: Network Printing
Network Printing...
Page 200: Network Connection
Network Connection Theory To connect your printer in a TCP/IP network environment, you must make sure that the internal network addresses in the printer have been set. In many cases, you have to enter only a unique IP address. However, you may also have to enter a subnet mask and/or a gateway (router) address,...
Page 201: Making The Connection
Making the Connection Ethernet Interface An RJ45 connector can be used as the Ethernet interface for this printer. When connecting your printer to an Ethernet network, the tasks you perform depend on how you plan to set the printer’s IP (Internet Protocol) address. Printers are shipped with a preset IP address, subnet mask, and gateway.
Page 202 When the printer’s message window displays , print a configura- READY tion page to verify that the IP address is set. Press this (until) the message window displays . . . key . . . READY RPOOF/PRINT MENU or if no optional hard disk kit is installed: PRINT MENU PRINT MENU CONFIGURATION PG...
Page 203: Setting The Address Manually
Setting the Address Manually You may also manually change the printer’s IP address, subnet mask, and gateway by using the following instructions. (See chapter 6, “Understanding the Ethernet Configuration Menus,” for more information.) When manually setting the IP address, turn off DHCP, BOOTP and ARP/PING first.
Page 204 Press this (until) the message window reads . . . key . . . ENABLE IP ADDRESS IP ADDRESS 000.000.000.000 Use the keys to move to each of the four number triplets. Use the keys to increase or decrease each number. IP ADDRESS If you don’t want to set the subnet mask or gateway, go to step 5.
Page 205 Press this (until) the message window displays . . . key . . . Use the keys to move to each of the four number triplets. Use the keys to increase or decrease each number. SUBNET MASK If you don’t want to set the gateway, go to step 5. If you want to set the gateway, follow these steps.
Page 206 Save your configuration changes and make the printer ready for printing again. Press this (until) the message window displays . . . key . . . Press the Cancel key 4 times. Print a configuration page to verify that the correct IP address, subnet mask, and gateway have been set.
Page 207: Network Printing
Network Printing Network printing terms are described below. AppleTalk Bonjour BOOTP DDNS DHCP HTTP IEEE802.1x IPsec IPv6 IPX/SPX LPD/LPR SMTP SNMP Port9100 WSD print This chapter contains descriptions on the network printing terms and the IPP printing methods. AppleTalk A generic name for the protocol suite developed by Apple Computer for com- puter networking.
Page 208: Bootp
BOOTP BOOTP (Bootstrap Protocol) is an Internet protocol that enables a diskless workstation to discover (1) its own IP address, (2) the IP address of a BOOTP server on the network, and (3) a file that can be loaded into memory to boot the workstation.
Page 209: Ieee802.1X
IEEE802.1x This protocol for determining the user authentication method within the LAN is compatible with wireless and wired LANs. Using the RADIUS server for user authentication, communication with authenticated users is permitted while all communication from unauthenticated clients is blocked, excluding authentication requests.
Page 210: Slp
Traditionally, in order to locate services on the network, users had to supply the host name or network address of the machine providing the desired ser- vice. This has created many administrative problems. However, SLP (Service Location Protocol) simplifies the discovery and use of network resources such as printers by automating a number of network ser- vices.
Page 211: Port 9100
Port 9100 When printing through a network, TCP/IP port number 9100 can be used to send raw data. WSD print Printing is possible using the WSD (Web Service on Devices) function installed in Windows Vista. A connection supports WSD, detects the printer on the network automatically and connects.
Page 212: Printing Via Ipp (Internet Printing Protocol)
Printing via IPP (Internet Printing Protocol) You must have administrator privileges in order to install the printer driver. If the User Account Control window appears when installing on Win- dows Vista/7/Server 2008/Server 2008 R2, click the Continue button or the Yes button. For IPP printing, specify the network setting.
Page 213 The connected printers are detected. Select this printer. [Search Setting]: To search for printers on other networks, click this but- ton. [Update List]: To update the printer information, click this button. Select Internet Printing as the printing method from the pull-down list, and then click Next.
Page 214 In the Confirm Installation Settings dialog box, click Install. [Installation Settings]: To change the settings, click this button. Click Finish. This completes the installation of the printer driver. Network Printing...
Page 215: Adding An Ipp Port Using Add Printer Wizard - Windows Server 2003/Xp/2000
Adding an IPP Port using Add Printer Wizard - Windows Server 2003/XP/2000 For Windows Server 2003/XP: Click Start, select Printers and Faxes, and then click Add Printer. For Windows 2000: Click Start, point to Settings, click Printers, and then click Add Printer. In the second dialog box select the Network Printer radio button and then choose Next.
Page 216 Windows Server 2003/XP—Go to step 4. Windows 2000—If you entered a valid path in the previous step, the fol- lowing message displays: “The server on which the KONICA MINOLTA magicolor 5670(5650) printer resides does not have the correct printer driver installed. If you want to install the driver on your local computer, click OK.”...
Page 217: Adding An Ipp Port Using Add Printer Wizard - Windows Vista/7/Server 2008/Server 2008 R2
Adding an IPP Port using Add Printer Wizard - Windows Vista/7/Server 2008/Server 2008 R2 Click Start, click Control Panel, and then click Printers. When using Windows 7/Server 2008 R2, View devices and print- ers under Hardware and Sound. Click Add a printer. In the dialog box click Add a network, wireless or Bluetooth printer.
Page 218 In the URL field in the next dialog box enter the printer’s network path- name in one of the following formats and then choose Next: http://ipaddress/ipp http://ipaddress:80/ipp http://ipaddress:631/ipp “Windows cannot connect to the printer. Make sure that you have typed the name correctly, and that the printer is connected to net- work.”...
Page 219: Printing Via Web Service Print Function
Printing via Web Service Print Function In Windows Vista/7/Server 2008/Server 2008 R2, printers on the network that support Web Service print can be detected and installed. You must have administrator privileges in order to install the printer driver. Before proceeding with the installation, be sure to exit all running applications.
Page 220 Turn on the power of the machine while it is connected to the network. Since the printer is searched for, be sure to connect the machine to the network. To use the Web service print, check that [Network discovery] is enabled in [Network and Sharing Center] on the computer.
Page 221: Adding A Printer From The Network Window
Adding a printer from the Network window In Windows Vista/Server 2008, you can add a Web service device using the addition function of the printer after connecting this machine. In Windows 7/Server 2008 R2, a window for specifying an installation disk does not appear after the machine is connected to the computer.
Page 222 Click Locate and install driver software (recommended). Click Browse my computer for driver software (advanced). Network Printing...
Page 223: Adding A Printer Using Add Printer Wizard
Click Browse, locate the directory on the CD-ROM where the printer driver files are located (for example, Drivers\Windows\color\Driv- ers\Win_x86\PS\<language>), and then click OK. Click Next. Click Close. Adding a printer using Add Printer Wizard In Windows Vista/Server 2008, you can add a Web service device using the addition function of the printer after connecting this machine.
Page 224 In the dialog box, click Add a local printer. Click Create a new port, and then select Standard TCP/IP port. Click Next. Network Printing...
Page 225 Select Web Services Device and type the IP address for the printer, and then click Next. The Found New Hardware Wizard dialog box appears. Click Locate and install driver software (recommended). Network Printing...
Page 226 Click Browse my computer for driver software (advanced). Click Browse, locate the directory on the CD-ROM where the printer driver files are located (for example, Drivers\Windows\color\Driv- ers\Win_x86\PS\<language>), and then click OK. Click Next. Click Close. Network Printing...
Page 227 Click Next. Select whether the printer driver is to be shared, and then click Next. Network Printing...
Page 228: Updating The Driver After Connecting This Machine
Click Finish. This completes the installation of the printer driver. Updating the driver after connecting this machine In Windows 7/Server 2008 R2, if this machine is connected without first installing the printer driver, the printer driver will not be correctly identified. If the printer driver is not correctly identified, the driver must be updated using [Update Driver].
Page 229 Right-click the device name of the machine that is under [Unspecified] and then click [Properties]. If [Unknown Device] appears instead of the device name of the machine, right-click to remove the device, and install the printer driver. To connect this machine as described in “Making the printer driver known from the Network window”...
Page 230: If The Bit Number Differs Between The Server Operating System And Client Operating System
If the bit number differs between the server operating system and client operating system If the bit number differs between the print server's running operating system and client computer's running operating system while Windows Server 2008/ Server 2008 R2 is running on the print server, the additional driver may not be installed correctly on the print server.
Page 231 From the print server (32 bits), map the client computer (64 bits) drive (for example, “C”), specified as a shared drive in step 1, as a network drive (for example, “z”). This setting is available for only PostScript driver. Install on the print server (32 bits) the driver for a 32-bit operating system. Network Printing...
Page 232 Right-click the printer that was installed, and then click the appropriate menu command to display printer properties. Select the Sharing tab, and then select the Share this printer check box. Click Additional Drivers. The Additional Drivers dialog box appears. Under Processor, select the x64 check box, and then click OK. Network Printing...
Page 233 Specify the folder containing the driver for a 64-bit operating system. A dialog box appears, requesting the location of the setup information file. Click Browse, and then select the setup information file (ntprint.inf) on the client computer mapped as a network drive. This setting is available for only PostScript driver.
Page 234: Troubleshooting
Troubleshooting Symptom Action Some client functions are Install the printer driver directly on the client not available with the Point computer. and Print feature when the server is running Windows Server 2003/Server 2008/ Server 2008 R2 and the cli- ent computer is running Windows 2000/XP/Vista/7.
Page 235: Using Pagescope Web Connection
Using PageScope Web Connection...
Page 236: About Pagescope Web Connection
About PageScope Web Connection This chapter provides information on PageScope Web Connection, an HTTP (HyperText Transfer Proto- col)-based web page that resides in your printer and that you can access using your Web browser. This page gives you instant access to printer status and the most frequently used printer configuration options.
Page 237: When Connecting With Windows Server 2008/Server 2008 R2
A network, to which both your PC and the printer are connected You cannot access PageScope Web Connection using a local (USB or Parallel) connection. When connecting with Windows Server 2008/Server 2008 R2 When PageScope Web Connection is started on a computer running Win- dows Server 2008/Server 2008 R2, only the System tab may appear, and the Job, Print and Network tabs may not.
Page 238: Setting Up The Printer Web
Setting Up the Printer Web Page Setting up the printer web page to run on your network involves two basic steps: Determining the name or address of your printer Setting up the “no proxy” preferences in your browser software Determining the Printer Name The printer web page can be accessed in two ways: The printer names can also be determined via WINS if the network supports it.
Page 239: Setting Up Your Browser Software
Setting Up Your Browser Software Since your printer resides on your intranet and is not accessible beyond the firewall of your network, you must set up the proper “preferences” in your browser software. Your printer name or IP address must be added to the “no proxy”...
Page 240: Netscape Navigator (Version 7.1)
Netscape Navigator (version 7.1) Start Netscape Navigator. From the Edit menu choose Preferences. Select the Advanced/Proxies directory from the left pane of the dialog box. Select the Manual Proxy Configuration radio button. In the No Proxy for: text box, type a comma after the last entry, and then type the printer name or the IP address of your printer.
Page 241: Understanding The Pagescope Web Connection Window
The illustration below identifies the navigation and configuration areas of the windows that you see in PageScope Web Connection windows. Links to main Link to Printer name topics Current status KONICA MINOLTA web site Version information Click to log out of current mode Links to subtopics...
Page 242: Current Status
Current Status The current status of the printer is displayed at the top of all PageScope Web Connection windows. The icon displays the type of status being displayed. Icon Status Description Examples Ready The printer is online READY and either ready to WARMING UP print or printing.
Page 243: Logging On To Pagescope Web Connection
Logging on to PageScope Web Connection Login Page User authentication, account track and language settings can be specified by using PageScope Web Connection. In order to perform authentication, you must log on in Administrator Mode. For details on authentication, refer to “Authentication”...
Page 244: Language Setting
Language Setting If necessary, the display language used for Web Connection can be changed. Public User Mode In Public User Mode, you can view configuration settings but not change them. Select Public User. Click the Log in button. Registered User Mode In Registered User Mode, you can view configuration settings but not change them.
Page 245: Account Track Mode
If Account Track (in the Network - Authentication - User Authentica- tion page) is set to On, continue with step 4. If it is set to Off, continue with step 5. – (If Synchronize User Authentication & Account Track is set to Do Not Synchronize and Account Track Method is set to Account Name &...
Page 246: Administrator Mode
Administrator Mode In order to change any configuration settings through PageScope Web Con- nection, you must first enter Administrator Mode. Select Administrator. Click the Log in button. Type the password in the Admin Password text box. Default password is set to “administrator”; however, once you have logged on in Administrator Mode, the password can be specified in the System - Admin Password window.
Page 247: Viewing Printer Status
Viewing Printer Status System Page On this page you find printer status and current configuration settings, printer identification, and links to all other web pages. All of the information displayed on the System page is read only. Viewing Printer Status...
Page 248: Device Information
Device Information Summary (shown previous) The System - Device Information - Summary window provides the follow- ing information. Item Description Printer name/status Shows the name assigned to your printer, and dis- plays the current status of the printer—just as it’s displayed on the printer’s control panel message window.
Page 249 Item Description Finisher Identifies whether the staple finisher is “Installed” or “Not Installed”. Network Lists the installed printer interface (Ethernet 10Base-T/100Base-TX/1000Base-T). Paper Source The System - Device Information - Paper Source window provides the fol- lowing information. Item Description Paper Source Identifies the paper feed units Tray 1/2/3/4 installed on the printer.
Page 250 Paper Source (Detail) The System - Device Information - Paper Source - Detail window provides the following information. Item Description Paper Source Displays the names of the paper trays. Paper Size Displays the paper sizes. Paper Type Displays the paper types. Capacity Displays the maximum capacity for each paper tray.
Page 251 Output Tray The System - Device Information - Output Tray window provides the fol- lowing information. Item Description Tray Displays the names of the output trays (Main Tray, Sub Tray). Sub Tray appears only if the optional staple finisher is installed. Paper Displays the status (Ready, Full) of the output trays.
Page 252 Storage The System - Device Information - Storage window provides the following information. Item Description Total Displays the total amount of space on the hard disk and CompactFlash card. If no optional storages are installed, “-” are dis- played. Used Displays the amount of space on the hard disk and CompactFlash card that are used.
Page 253 Interface Information The System - Device Information - Interface Information window provides the following information. Item Description Protocol TCP/IP If Enable is displayed, TCP/IP is enabled. Information If Disable is selected, TCP/IP is disabled. IPv6 If Enable is displayed, IPv6 is enabled. If Disable is selected, IPv6 is disabled.
Page 254 Item Description Dynamic DNS If Enable is displayed, Dynamic DNS is enabled. If Disable is selected, Dynamic DNS is dis- abled. If Enable is displayed, IPP is enabled. If Disable is selected, IPP is disabled. If Enable is displayed, LPD is enabled. If Disable is selected, LPD is disabled.
Page 255 Item Description IPv6 Global Identifies the IPv6 global address of the Eth- Address ernet interface. MAC Address Identifies the Media Access Control (MAC) address of the Ethernet interface. Host Name Identifies the host name for the printer. Print Server Name Identifies the Print Server Name for the Net- (NetWare) Ware.
Page 256 Consumables The System - Device Information - Consumables window provides the fol- lowing information. Item Description Consumables Identifies the type of consumable that is being moni- tored. Status Indicates the remaining life of the consumables. Toner Cartridge, Imaging Unit, Transfer Belt, Transfer Roller, Fuser Unit: Percentage Waste Toner Bottle: Ready, Near Full, or Full Staple: Ready, Empty...
Page 257: Counter
Counter The System - Counter window provides the following information. Item Description Pages Printed Indicates the number of prints. Sheets Printed by Indicates the number of prints grouped by Paper Paper Size Size. Sheets Printed by Indicates the number of prints grouped by Paper Paper Type Type.
Page 258: Online Assistance
Contact Information Displays the web address for assistance. Product Help URL Displays the web address for assistance. Corporate URL Displays the KONICA MINOLTA web address. Supplies and Accesso- Displays the web address where you can order ries printer supplies and accessories.
Page 259: User Authentication
User Authentication This page appears only when logged on to Registered User Mode. User Password change The password for the user who is logged on can be changed from the Sys- tem - User Authentication - User Password change page. Item Description User Name...
Page 260 Registration Information The registration information for the user who is logged on can be checked from the System - User Authentication - Registration Information page. Item Description Registration User Infor- Shows the registration number (No.), user name mation and account name for the user who is logged on. Only the account name is displayed if Synchronize User Authentication &...
Page 261: Job Page
Job Page This page allows you to view the status of current print jobs. Active Job List The Job - Active Job List window provides the following information for up to 49 print jobs: Item Description Job Number Displays the print job identification number. Each print job that the printer receives is assigned a unique identification number.
Page 262: Done Job List
Done Job List The Job - Done Job List window provides the following information for up to 50 print jobs: Item Description Job Number Displays the print job identification number. Each print job that the printer receives is assigned a Number unique identification number.
Page 263: Done Job List (Detail)
Done Job List (Detail) The Job - Done Job List - Detail window provides the following information for the selected job: Item Description Job Number Displays the print job identification number. Each print job that the printer receives is assigned a Num- ber unique identification number.
Page 264: Print Page
Print Page This page allows you to check the settings for printing when there is no PDL printer driver. Default Settings General Settings The Print - Default Settings - General Settings window provides the follow- ing information. Item Description Indicates default language to be selected. Paper Source The paper tray that is normally used is indicated.
Page 265 Item Description Output Tray Displays the name of the output trays (Main Tray, Sub Tray). Sub Tray appears only if the optional staple finisher is installed. Copies Indicates the default setting for number of copies to be printed. Paper Size Indicates the default setting for the size of paper.
Page 266 Paper Source Settings The Print - Default Settings - Paper Source Settings window provides the following information. Item Description Tray1 Paper Size Indicates the setting for the size of paper loaded into Tray 1. Width Indicates the paper width when Paper Size is set to Custom Size.
Page 267 Item Description Tray2 Paper Size Indicates the setting for the size of paper loaded into Tray 2. Width Indicates the paper width when Paper Size is set to Custom Size. This menu item appears only if the 250 sheet tray is installed for Tray Length Indicates the paper width when Paper Size is set to Custom Size.
Page 268 Item Description Tray Chaining If Enable is indicated and the specified paper tray runs out of paper during print- ing, a paper tray loaded with paper of the same size is automatically selected so printing can continue. If Disable is indicated and the specified paper tray runs out of paper, printing stops.
Page 269 Finisher Settings This page appears only if the optional staple finisher is installed. The Print - Default Settings - Finisher Settings window provides the follow- ing information. Item Description Finishing Shows the staple finisher setting. Job Separating Shows the setting for shifting the output position for each job.
Page 270 PCL Settings The Print - Default Settings - PCL Settings window provides the following information. Item Description Font Number Displays the default font in the PCL language. Symbol Set Displays the symbol set used with the PCL lan- guage. Lines Per Page Indicates how many lines are in a page in PCL lan- guage.
Page 271 PS Settings The Print - Default Settings - PS Settings window provides the following information. Item Description Wait Timeout Indicates Postscript timeout. “0” means that no time-out control is effective. PS Protocol Displays the settings for the PS protocol. Print to PS Error Displays whether or not error printing is performed.
Page 272 XPS Settings The Print - Default Settings - XPS Settings window provides the following information. This page appears only if a hard disk kit or a CompactFlash card is installed. Item Description Digital Signature Shows whether XPS digital signatures are enabled or disabled.
Page 273 Print Quality Settings The Print - Default Settings - Print Quality Settings window provides the following information. Item Description Print Color Mode If Color is indicated, the pages are Quality Set- printed in full color. tings If Monochrome is indicated, the pages are printed in black and white.
Page 274 Item Description Halftone Indicates how halftones are reproduced. (Image/Text/ If Line Art is indicated, halftones are Graphics Printing) reproduced with high precision. If Detail is indicated, halftones are repro- duced with detail. If Smooth is indicated, halftones are reproduced with smoothness. Edge Enhancement Shows the settings for whether or not (Image/Text/...
Page 275 Item Description PS Settings Image/Text/Graphics Identifies the color space for RGB data. Printing (RGB Source) Image/Text/Graphics Indicates the color intent to be used on Printing (RGB Intent) conversion RGB to CMYK by printer. Image/Text/Graphics Indicates the method to reproduce RGB Printing (RGB Gray black and gray.
Page 276 Camera Direct Settings The Print - Default Settings - Camera Direct Settings window provides the following information. Item Description Camera Direct If Enable is indicated, camera direct printing is enabled. Print If Disable is indicated, camera direct printing is disabled. Paper Source Indicates the tray that is used for camera direct printing.
Page 277 Item Description Economy Print Shows the setting for whether or not Economy Print Mode Mode is enabled. When Economy Print Mode is enabled, the amount of toner used is reduced when printing many draw- ings. Glossy Mode Shows the setting for whether or not Glossy Mode is enabled.
Page 278: Font/Form
Font/Form PCL Font The Print - Font/Form - PCL Font page allows you to check the list of PCL fonts that the printer manages. Item Description Number Displays the control number of the font. Font Name Displays the name of the fonts. Source Displays the storage source of the font.
Page 279 PS Font The Print - Font/Form - PS Font page allows you to check the list of Post- Script fonts that the printer manages. Item Description Number Displays the control number of the font. Font Name Displays the name of the fonts. Source Displays the storage source of the font.
Page 280 Form Overlay The Print - Font/Form - Form Overlay page allows you to check the list of form overlays that the printer manages. Item Description Number Displays the control number of the overlay. File Name Displays the name of the overlays. Source Displays the storage source of the form overlay.
Page 281 Color Profile The Print - Font/Form - Color Profile page allows you to check the list of color profiles that the printer manages. Item Description Number Displays the control number of the color profile. File Name Displays the file name of the color profile. Profile Name Displays the name of the color profile.
Page 282: Report Types
Report Types The Print - Report Types window provides the following information. Item Description Configuration Page Prints the printer configuration page. Demo Page Prints the printer demo page. Statistics Page Prints the statistics page such as the number of pages printed. PCL Font Page Prints the PCL font lists.
Page 283: Direct Print
Direct Print This page appears only if a hard disk kit or a CompactFlash card is installed. The Print - Direct Print page allows you to print a file directly from the printer without starting up the application. This page appears when both Public Access (in the Network - Authentication - User Authentication page) and Print (in the Sys- tem - Authentication - Default Permission Settings) are set to Allow.
Page 284: Configuring The Printer
Configuring the Printer In order to make any configuration changes through PageScope Web Con- nection, you must first enter Administrator Mode. See “Administrator Mode” on page 226 for instructions on logging into Administrator Mode. System Page This page allows you to configure several user- and printer-specific items. Configuring the Printer...
Page 285: Device Information
Device Information Summary (shown previous) The System - Device Information - Summary window provides the follow- ing information. Item Description Printer name/status Shows the name assigned to your printer, and dis- plays the current status of the printer—just as it’s displayed on the printer’s control panel message window.
Page 286 Item Description Finisher Identifies whether the staple finisher is “Installed” or “Not Installed”. Network Lists the installed printer interface (Ethernet 10Base-T/100Base-TX/1000Base-T). Paper Source The System - Device Information - Paper Source window provides the fol- lowing information. Item Description Paper Source Identifies the paper feed units Tray 1/2/3/4 installed on the printer.
Page 287 Paper Source (Detail) The System - Device Information - Paper Source - Detail window provides the following information. Item Description Paper Source Displays the names of the paper trays. Paper Size Displays the paper sizes. Paper Type Displays the paper types. Capacity Displays the maximum capacity for each paper tray.
Page 288 Output Tray The System - Device Information - Output Tray window provides the fol- lowing information. Item Description Tray Displays the names of the output trays (Main Tray, Sub Tray). Sub Tray appears only if the optional staple finisher is installed. Paper Displays the status (Ready, Full) of the output trays.
Page 289 Storage The System - Device Information - Storage window provides the following information. Item Description Total Displays the total amount of space on the hard disk and CompactFlash card. If no optional storages are installed, “-” are dis- played. Used Displays the amount of space on the hard disk and CompactFlash card that are used.
Page 290 Interface Information The System - Device Information - Interface Information window provides the following information. Item Description Protocol TCP/IP If Enable is displayed, TCP/IP is enabled. Information If Disable is selected, TCP/IP is disabled. IPv6 If Enable is displayed, IPv6 is enabled. If Disable is selected, IPv6 is disabled.
Page 291 Item Description Dynamic DNS If Enable is displayed, Dynamic DNS is enabled. If Disable is selected, Dynamic DNS is dis- abled. If Enable is displayed, IPP is enabled. If Disable is selected, IPP is disabled. If Enable is displayed, LPD is enabled. If Disable is selected, LPD is disabled.
Page 292 Item Description IPv6 Global Identifies the IPv6 global address of the Eth- Address ernet interface. MAC Address Identifies the Media Access Control (MAC) address of the Ethernet interface. Host Name Identifies the host name for the printer. Print Server Name Identifies the Print Server Name for the Net- (NetWare) Ware.
Page 293 Consumables The System - Device Information - Consumables window provides the fol- lowing information. Item Description Consumables Identifies the type of consumable that is being moni- tored. Status Indicates the remaining life of the consumables. Toner Cartridge, Imaging Unit, Transfer Belt, Transfer Roller, Fuser Unit: Percentage Waste Toner Bottle: Ready, Near Full, or Full Staple: Ready, Empty...
Page 294: Counter
Counter The System - Counter window provides the following information. Item Description Pages Printed Indicates the number of prints. Sheets Printed by Indicates the number of prints grouped by Paper Paper Size Size. Sheets Printed by Indicates the number of prints grouped by Paper Paper Type Type.
Page 295: Online Assistance
Product Help URL Sets the help web site address for printer assis- tance. Range: Up to 127 characters Default: http://printer.konicaminolta.com Corporate URL Sets the KONICA MINOLTA corporate web site address. Range: Up to 127 characters Default: http://printer.konicaminolta.com Configuring the Printer...
Page 296 Item Description Supplies and Accesso- Sets the web address where you can purchase ries printer supplies and accessories. Range: Up to 127 characters Default: http://www.q-shop.com Contact Phone Number Specifies the telephone number of the printer administrator. Range: Up to 31 characters Default: [Blank] Contact Address Specifies the address of the printer administrator.
Page 297: Import/Export
Import/Export This page appears only if a hard disk kit or a CompactFlash card is installed. Job Log The System - Import/Export - Job Log window allows you to configure the following items. This page appears when Job Log (in the System - Machine Settings page) is set to Enable.
Page 298 User Information The System - Import/Export - User Information window allows you to con- figure the following items. This page appears when User Authentication (in the Network - Authentication - User Authentication page) is set to On. Item Description Import Text Box Type in the name of the file containing the registered user authentication information to be imported.
Page 299: Authentication
Authentication This page appears only if a hard disk kit or a CompactFlash card is installed. Default Permission Settings This page appears only if Public Access is set to Allow (in the Net- work - Authentication - User Authentication page). The System - Authentication - Default Permission Settings window allows you to configure the following items.
Page 300 User Registration This page appears only if User Authentication is set to On (in the Network - Authentication - User Authentication page). The System - Authentication - User Registration window allows you to configure the following items. Item Description Search for Number Select the user registration number (No.) to be searched for.
Page 301 User Registration (New Registration) The System - Authentication - User Registration - New Registration win- dow allows you to configure the following items. Item Description User Shows the new user registration number (No.). Registration User Name Specify the name of the new user. Range: Up to 64 characters Default: [Blank] A user name that already exists cannot be...
Page 302 Item Description Account Specify the account that the user belongs to. Name Range: Up to 8 characters Default: [Blank] Create the account in the System - Authentication - Account Track Registration - New Registration page, and then specify this setting. When specifying this setting, an account name that does not exist cannot be specified.
Page 303 Account Track Registration This page appears only if Account Track is set to On (in the Network - Authentication - User Authentication page). The System - Authentication - Account Track Registration window allows you to configure the following items. Item Description Search for Number Select the account registration number (No.) to be...
Page 304 Account Track Registration (New Registration) The System - Authentication - Account Track Registration - New Regis- tration window allows you to configure the following items. Item Description Account Shows the new account registration number (No.). Track Reg- Account Specify the name of the new account. istration Name Range: Up to 8 characters...
Page 305 Item Description Function Print Select whether or not the new account is permitted Permission to print. Choices: Allow, Restrict Default: Allow Output Color Select whether or not the new account is permitted Permission to print in color. Choices: Allow, Economy Print Mode Only, Restrict Default: Allow Black Select whether or not the new account is permitted...
Page 306: Date/Time
Date/Time Manual Settings The System - Date/Time - Manual Settings window allows you to configure the following items: Item Description Year Specifies the year for the printer’s internal clock. Configuration Menu Equivalent: SYS DEFAULT MENU - CLOCK - DATE Month Specifies the month for the printer’s internal clock.
Page 307 Item Description Minute Specifies the minute for the printer’s internal clock. Configuration Menu Equivalent: SYS DEFAULT MENU - CLOCK - TIME Time Zone Specifies the time zone for sending e-mail notifica- tions. Configuration Menu Equivalent: SYS DEFAULT MENU - CLOCK - TIME ZONE Apply button Applies the configuration settings for this window.
Page 308 Time Adjustment Settings The System - Date/Time - Time Adjustment Settings window allows you to configure the following items: Item Description Time Adjustment Select whether or not the time is automatically adjusted with NTP. Choices: Enable, Disable Default: Disable NTP Server Address Specifies the NTP server address.
Page 309 Item Description Adjustment Time Shows the last modification date and time. Default: Unknown Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Configuring the Printer...
Page 310: Admin Password
Admin Password The System - Admin Password window allows you to configure the follow- ing items: Item Description Current Password Type in the current password. Range: Up to 16 characters Default: [Blank] New Password Sets a new password to enter Administrator Mode. Range: Up to 16 characters Default: [Blank] Passwords can be set to any string of...
Page 311 Item Description Retype Password Verifies the new password typed in the New Pass- word text box. Range: Up to 16 characters Default: [Blank] If the password typed in three text boxes doesn’t match, the following message displays when you choose the Apply button: “Please retype the correct password.”...
Page 312: Machine Settings
Machine Settings The System - Machine Settings window allows you to configure the follow- ing items: Item Description Administrator Name Specifies the name of the administrator for the printer. Range: Up to 127 characters Default: [Blank] Device Name Specifies the name of the printer. Range: Up to 127 characters Default: [Blank] Device Location...
Page 313 Item Description Do Startup Page Selects whether or not a startup page is printed when the printer is turned on. Choices: On, Off Default: Off Configuration Menu Equivalent: SYS DEFAULT MENU - STARTUP OPTIONS - DO STARTUP PAGE Auto Continue Selects whether or not printing continues if the size or type of paper in the selected paper tray is differ- ent from the size or type of paper for the print job.
Page 314 8 Minutes, 9 Minutes, 10 Minutes, 11 Minutes, 12 Minutes, 13 Minutes, 14 Minutes, 15 Minutes, 30 Minutes, 1 Hours, 3 Hours Default: 5 Minutes (magicolor 5670EN) 15 Minutes (magicolor 5650EN) Configuration Menu Equivalent: SYS DEFAULT MENU - ENERGY SAVER TIME...
Page 315: Rom Version
ROM Version The System - ROM Version window provides the following information. Item Description Engine ROM Version Displays the ROM version of the printer engine. Controller ROM Ver- Displays the ROM version of the printer controller. sion Boot ROM Version Displays the ROM version of the Boot ROM.
Page 316: Maintenance
Maintenance Clear Settings The System - Maintenance - Clear Settings page allows you to reset the printer settings to its factory defaults. Item Description Printer Settings Resets the printer settings to their defaults. Configuration Menu Equivalent: SYS DEFAULT MENU - RESTORE DEFAULTS - RESTORE PRINTER Network Settings Resets the network settings to their defaults.
Page 317 Item Description Clear button When clicked, the message “Is it OK to restore Fac- tory Defaults?” appears. Click OK to automatically restart the printer and return the settings to their default values. Reset Printer The System - Maintenance - Reset Printer page allows you to reset the printer controller.
Page 318: Status Notification Settings
Status Notification Settings Configuring the Printer...
Page 319 The System - Status Notification Settings window allows you to configure the following items: Item Description IP Address Notification Specify the IP address of the SNMP trap Address receiver. An IPv4 or IPv6 address or a host name can be specified. Range: Up to 63 characters Default: 0.0.0.0 Port Num-...
Page 320 Item Description Alert Paper Empty Specifies whether or not a notification is sent when the paper tray runs out of paper. Choices: Enable, Disable Default: Enable Paper Jam Specifies whether or not a notification is sent when a paper misfeed occurs. Choices: Enable, Disable Default: Enable Maintenance...
Page 321 Item Description Service Call Selects whether or not notification is sent to the service representative when a con- dition occurs that requires servicing. Choices: Enable, Disable Default: Enable Job Complete Specifies whether or not a notification is sent when a print job is completed cor- rectly.
Page 322: Job Page
Job Page This page allows you to view the status of current print jobs. Active Job List The Job - Active Job List window provides the following information for up to 49 print jobs. Item Description Job Number Displays the print job identification number. Each print job that the printer receives is assigned a unique identification number.
Page 323: Done Job List
Done Job List The Job - Done Job List window provides the following information for up to 50 print jobs. Item Description Job Number Displays the print job identification number. Each print job that the printer receives is assigned a unique identification number.
Page 324: Done Job List (Detail)
Done Job List (Detail) The Job - Done Job List - Detail window provides the following information for the selected job. Item Description Job Number Displays the print job identification number. Each print job that the printer receives is assigned a unique identification number.
Page 325: Print Page
Print Page This page allows more detailed printer settings to be specified. Local Interface The Print - Local Interface window allows you to configure the following items: Item Description I/O Timeout Specifies the reception timeout (in seconds). Range: 5-300 Default: 15 Configuration Menu Equivalent: INTERFACE MENU - JOB TIMEOUT Apply button...
Page 326: Default Settings
Default Settings General Settings The Print - Default Settings - General Settings window allows you to con- figure the following items: Item Description Selects default language to be selected. Choices: Auto, PCL, PS Default: Auto Configuration Menu Equivalent: SYS DEFAULT MENU - EMULATION - DEF.
Page 327 Item Description Duplex If Long-Edge Binding is selected, the pages will be printed on both sides of the paper for long-edge binding. If Short-Edge Binding is selected, the pages will be printed on both sides of the paper for short-edge binding.
Page 328 Item Description Paper Size Specifies the default setting for the size of paper. Choices: Letter, Legal, Executive, A4, A5, A6, B5 (JIS), B6, Government Letter, Statement, Folio, SP Folio, UK Quarto, Foolscap, Government Legal, 16K, Photo 4x6, Kai 16, Kai 32, Envelope C5, Envelope C6, Envelope DL, Envelope Monarch, Envelope Chou #3, Envelope Chou #4, B5 (ISO), Envelope Com10, Envelope You...
Page 329 Item Description Paper Type Specifies the default setting for the type of paper. Choices: Plain Paper, Recycled, Thick 1, Thick 2, Label, Transparency, Envelope, Postcard, Letterhead, Glossy 1, Glossy 2 Default: Plain Paper Configuration Menu Equivalent: SYS DEFAULT MENU - PAPER - DEFAULT PAPER - PAPER TYPE Collate If On is selected, all pages in a copy of the docu-...
Page 330 Paper Source Settings Configuring the Printer...
Page 331 The Print - Default Settings - Paper Source Settings window allows you to configure the following items: Item Description Tray1 Paper Size Specifies the setting for the size of paper loaded into Tray 1. Choices: Any, Letter, Legal, Executive, A4, A5, A6, B5 (JIS), B6, Government Letter, Statement, Folio, SP Folio, UK Quarto, Foolscap, Government Legal,...
Page 332 Item Description Width Specifies the paper width when Paper Size is set to Custom Size. Range: 3.63 - 8.50 (inch) / 92 - 216 (mm) Configuration Menu Equivalent: PAPER MENU - PAPER SOURCE - TRAY1 - CUSTOM SIZE - WIDTH Length Specifies the paper length when Paper Size is set to Custom Size.
Page 333 Item Description Paper Type Specifies the setting for the type of paper loaded into Tray 2. Choices: Any, Plain Paper, Recycled Default: Plain Paper Configuration Menu Equivalent: PAPER MENU - PAPER SOURCE - TRAY2 - PAPER TYPE Tray2 Paper Size Specifies the setting for the size of paper (250 sheet tray) loaded into Tray 2.
Page 334 Item Description Width Specifies the paper width when Paper Size is set to Custom Size. Range: 3.63 - 8.50 (inch)/92 - 216 (mm) Configuration Menu Equivalent: PAPER MENU - PAPER SOURCE - TRAY2 - CUSTOM SIZE - WIDTH Length Specifies the paper length when Paper Size is set to Custom Size.
Page 335 Item Description Tray3 Paper Size Displays the setting for the size of paper loaded into Tray 3. This item appears only if Configuration Menu Equivalent: the optional PAPER MENU - PAPER lower feeder unit SOURCE - TRAY3 - PAPER is installed. SIZE Paper Type Specifies the setting for the type of paper...
Page 336 Item Description Tray Chaining Tray Chaining If Enable is selected and the specified paper tray runs out of paper during print- ing, a paper tray loaded with paper of the same size is automatically selected so printing can continue. If Disable is selected and the specified paper tray runs out of paper, printing stops.
Page 337 Tray Mapping Settings The Print - Default Settings - Tray Mapping Settings window provides the following information. Item Description Tray Mapping Mode Select whether or not the Tray Mapping function is used. Choices: On, Off Default: Off Configuration Menu Equivalent: PAPER MENU - PAPER SOURCE - TRAY MAPPING - TRAY MAPPING MODE...
Page 338 Item Description Logical Tray 0-9 Select the tray that is used for printing when a print job is received from another manufacturer’s printer driver. The default setting for Logical Tray 1 is Physical Tray1. The default setting for all other trays is Phys- ical Tray2.
Page 339: Finisher Settings
Finisher Settings This page appears only if the optional staple finisher is installed. The Print - Default Settings - Finisher Settings window provides the follow- ing information. Item Description Finishing When Sub Tray is selected, the paper is fed to the sub output tray.
Page 340 Item Description Job Separating The paper is fed to the main output tray with each print job slightly shifted. Choices: On, Off Default: Off Configuration Menu Equivalent: PAPER MENU - JOB SEPARATION Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values.
Page 341 Item Description Symbol Set Selects the symbol set used with the PCL language. Default: PC-8 Configuration Menu Equivalent: SYS DEFAULT MENU - EMULATION - PCL - FONT SOURCE - SYMBOL Lines Per Page Selects how many lines are in a page in PCL lan- guage.
Page 342 PS Settings The Print - Default Settings - PS Settings window allows you to configure the following items: Item Description Wait Timeout Sets Postscript timeout. “0” means that no time-out control is effective. Range: 0 - 300 (in seconds) Default: 0 Configuration Menu Equivalent: SYS DEFAULT MENU - EMULATION - POSTSCRIPT - WAIT TIMEOUT...
Page 343 Item Description Print to PS Error Specifies whether or not error printing is performed. Choices: On, Off Default: Off Configuration Menu Equivalent: SYS DEFAULT MENU - EMULATION - POSTSCRIPT - PS ERROR PAGE Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values.
Page 344 This page appears only if a hard disk kit or a CompactFlash card is installed. Item Description Digital Signature Specify whether to verify digital signature. When Enable is selected, the document without a valid digital signature is not printed. Choices: Enable, Disable Default: Disable Configuration Menu Equivalent: SYS DEFAULT MENU - EMULATION...
Page 345 Print Quality Settings The Print - Default Settings - Print Quality Settings window allows you to configure the following items: Item Description Print Color Mode If Color is selected, the pages are printed in Quality full color. Settings If Monochrome is selected, the pages are printed in black and white.
Page 346 Item Description Color Separation If On is selected, color separation is per- formed. If Off is selected, color separation is not per- formed. Choices: On, Off Default: Off Configuration Menu Equivalent: QUALITY MENU - COLOR SEPARATION Brightness Specifies the brightness of the printed image.
Page 347 Item Description Edge Enhance- Select whether image/text/graphics edges ment (Image/Text/ are emphasized. Graphics Printing) If On is selected, the edges are empha- sized. If Off is selected, the edges are not empha- sized. Choices: On, Off Default: Off (Image) On (Text / Graphics) Configuration Menu Equivalent: QUALITY MENU - EDGE ENHANCEMENT –IMAGE/...
Page 348 Item Description Economy Print Select whether to print graphics with a Mode reduced density by reducing the amount of toner that is used. When Economy Print Mode is enabled, the amount of toner used is reduced when print- ing many drawings. Choices: On, Off Default: Off Configuration Menu Equivalent:...
Page 349 Item Description Image/Text/ Specifies the color space for RGB data. Graphics Printing Choices: Device Color, sRGB (Source) Default: sRGB Configuration Menu Equivalent: QUALITY MENU - PCL SETTING - IMAGE/TEXT/ GRAPHICS PRINTING - RGB SOURCE Image/Text/ Specifies the color intent to be used on con- Graphics Printing version RGB to CMYK by printer.
Page 350 Item Description Image/Text/ Specifies the color space for RGB data. Settings Graphics Printing Choices: Device Color, sRGB, AppleRGB, (RGB Source) AdobeRGB1998, ColorMatchRGB, BlueAdjustRGB, Custom Profile Default: sRGB Configuration Menu Equivalent: QUALITY MENU - PS SETTING - IMAGE/TEXT/ GRAPHICS PRINTING - RGB SOURCE Image/Text/ Specifies the color intent to be used on con-...
Page 351 Item Description Image/Text/ Specifies the ICC destination profile to be Graphics Printing used for printed output. (Destination Pro- Choices: Auto, Custom Profile file) Default: Auto Configuration Menu Equivalent: QUALITY MENU - PS SETTING - IMAGE/TEXT/ GRAPHICS PRINTING - DESTINATION PROF Simulation (Pro- Specifies the specific ICC simulation profile file)
Page 352 Item Description Calibration Tone Calibration If On is indicated, image adjustments are Settings applied. If Off is indicated, image adjustments are not applied. Choices: On, Off Default: On Configuration Menu Equivalent: QUALITY MENU - CALIBRATION - TONE CALIBRATION Cyan/Magenta/ Specifies the density of the highlight color. Yellow/Black Den- Choices: +3, +2, +1, 0, -1, -2, -3 sity (Highlight)
Page 353 Item Description Clear button Resets all configuration settings to previous values. Camera Direct Settings Configuring the Printer...
Page 354 The Print - Default Settings - Camera Direct Settings allows you to config- ure the following items: Item Description Camera Direct If Enable is selected, camera direct printing is enabled. Print If Disable is selected, camera direct printing is disabled. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent:...
Page 355 Item Description Contrast Specifies the contrast of the image. Choices: -15%, -10%, -5%, 0, +5%, +10%, +15% Default: 0 Configuration Menu Equivalent: CAMERA DIRECT - IMAGE QUALITY - CONTRAST Economy Print Select whether to print graphics with a reduced density by Mode reducing the amount of toner that is used.
Page 356 Item Description RGB Intent Specifies the characteristic applied when converting RGB image data to CMYK data. If Vivid is selected, a vivid output is produced. If Photographic is selected, a brighter output is produced. Choices: Vivid, Photographic Default: Photographic Configuration Menu Equivalent: CAMERA DIRECT - IMAGE QUALITY - RGB INTENT RGB Gray...
Page 357: Download Font/Form
Download Font/Form This page appears only if a hard disk kit or a CompactFlash card is installed. PS Font The printer must have an optional hard disk kit or CompactFlash card to use the PS Font parameters described below. The Print - Download Font/Form - PS Font window allows you to configure the following items: Item Description...
Page 358 Item Description Delete button Deletes the PostScript font file(s) whose check boxes the left end are checked. Form Overlay The Print - Download Font/Form - Form Overlay window allows you to configure the following items: Item Description Download Form Radio button Specifies the download destination (HDD/ Overlay Memory Card) of the form overlay file.
Page 359 Item Description Delete button Deletes the PostScript font file(s) whose check boxes the left end are checked. Color Profile The Print - Download Font/Form - Color Profile window allows you to con- figure the following items: Item Description Download Color Radio button Specifies the download destination (HDD/ Profile...
Page 360 Item Description Profile Name Displays the name of the color profile. Class Displays the type of color profile. Color Space Displays the color space for the color pro- file. Source Displays the storage source of the color profile. Delete button Deletes the PostScript font file(s) whose check boxes the left end are checked.
Page 361: Network Page
Network Page This page allows you to configure network settings. For more information on these protocols, see chapter 7, “Network Printing.” TCP/IP TCP/IP The Network - TCP/IP - TCP/IP window allows you to configure the following items. For more information on these TCP/IP, see chapter 7, “Network Print- ing.”...
Page 362 Item Description Speed Specifies the operating mode and speed for Ethernet. Choices: Auto, 10Base-T(Half), 10Base-T(Full), 100Base-TX(Half), 100Base-TX(Full), 1000Base-T(Full) Default: Auto Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - SPEED/DUPLEX Select whether or not LPD is used. Choices: Enable, Disable Default: Enable Select whether or not SLP is used.
Page 363 IPv4 Settings The Network - TCP/IP - IPv4 Settings window allows you to configure the following items. For more information on these TCP/IP, see chapter 7, “Net- work Printing.” Item Description Auto IP Specifies the automatic assigning method for the printer IP address.
Page 364 Item Description IP Address* Sets the printer’s IP address. Range: 0–255 for each xxx triplet Default: 0.0.0.0 If the specified IP address is outside of the allowable range, the value is not changed, even after the Apply button is clicked. The setting returns to the previous value.
Page 365 IPv6 Settings The Network - TCP/IP - IPv6 Settings window allows you to configure the following items. For more information on these TCP/IP, see chapter 7, “Net- work Printing.” Item Description IPv6 Select whether or not IPv6 is used. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - TCP/...
Page 366 Item Description IPv6 Link Local Displays IPv6 Link Local Address. Address Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - TCP/ IP - IPv6 - LINK LOCAL IPv6 Global Specifies the IPv6 Global Address. Address Range: Up to 43 characters Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - TCP/ IP - IPv6 - GLOBAL ADDRESS When IPv6 Auto Setting is set to ENABLE, this...
Page 367 RAW Port Settings The Network - TCP/IP - RAW Port Settings window allows you to configure the following items. For more information on these TCP/IP, see chapter 7, “Network Printing.” Item Description RAW Port Select whether or not RAW port is used. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent:...
Page 368 Item Description RAW Port Select whether or not the RAW Port bidirectional is used. Bidirectional Choices: Enable, Disable Default: Disable Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - TCP/ IP - RAW PORT - BIDIRECTIONAL Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values.
Page 369 DNS Settings The Network - TCP/IP - DNS Settings window allows you to configure the following items. For more information on these TCP/IP, see chapter 7, “Net- work Printing.” Item Description Host Name Specifies the host name. Range: Up to 63 characters Default: MC5670-xxxxxx MC5650-xxxxxx xxxxxx displays six last digits of the MAC address...
Page 370 Item Description Domain Name Select whether or not the domain name automatic Automatic acquisition is used. Acquisition Choices: Enable, Disable Default: Enable DNS Server Specifies the DNS server. Up to three can be registered. Default: 0.0.0.0 An IPv4 or IPv6 address can be specified. DNS Server Select whether or not the DNS server automatic Automatic...
Page 371 IP Address Filtering The Network - TCP/IP - IP Address Filtering page allows you to specify the IP address and limitations for accessing the printer. The settings described below are not applied to the DNS server and DHCP server. If the range of permitted IP addresses in Access Permission Address overlaps the range of refused IP address in Access Refuse Address, the refuse setting of Access Refuse Address is given pri- ority.
Page 372 Item Description Access Permis- If Enable is selected, the range of IP addresses permitted sion Address access to the printer can be specified. A maximum of five ranges of permitted IP addresses can be specified. In addition, access from an IP address out of the specified range is prohibited.
Page 373 Item Description Access Refuse If Enable is selected, the range of IP addresses refused Address access to the printer can be specified. A maximum of five ranges of refused IP addresses can be specified. If Disable is selected, the refused access setting is disabled.
Page 374 IPsec The Network - TCP/IP - IPsec window allows you to configure the following items. For more information on these TCP/IP, see chapter 7, “Network Print- ing.” Item Description Generic IPsec Displays whether to enable or disable the IPsec Settings function.
Page 375 Item Description IKE Settings /IPsec SA Set- Click this icon to delete the settings. tings /IPsec Peer Settings (Delete icon) IPsec (General Settings) The Network - IPsec - General Settings window allows you to configure the following items. Item Description IPsec Select whether to enable or disable the IPsec function.
Page 376 Item Description IKE Life Time Specifies the IKE Life Time (in seconds). Range: 80-604800 Default: 28800 IKE Diffie-Hell- Selects IKE Diffie-Hellman Group. man Group Choices: Group1, Group2 Default: Group2 IPsec SA Life Specifies the IPsec SA life Time (in seconds). Time Range: 120-604800 Default: 3600...
Page 377 IPsec (IKE Settings) The Network - IPsec - IKE Settings window allows you to configure the fol- lowing items. Item Description Displays the number (No.) to be registered. Encryption Algo- Select the encryption algorithm to be used when creating rithm a control tunnel.
Page 378 Item Description Cancel button Click to cancel the entered data and return to the Network - TCP/IP - IPsec page. IPsec (IPsec SA Settings) The Network - IPsec - IPsec SA Settings window allows you to configure the following items. Item Description Displays the number (No.) to be registered.
Page 379 Item Description Encryption Algo- When ESP is selected for Security Protocol, specify the rithm for ESP ESP encryption algorithm. Choices: None, DES-CBC, 3DES-CBC, AES-CBC, AES-CTR Default: None Authentication When ESP is selected for Security Protocol, specify the Algorithm for ESP authentication algorithm. Choices: None, MD5, SHA-1 Default: None Authentication...
Page 380 IPsec (IPsec Peer Settings) The Network - IPsec - IPsec Peer Settings window allows you to configure the following items. Item Description Displays the number (No.) to be registered. Perfect Forward To increase the IKE strength, select Use. Secrecy Choices: Not Use, Use Default: Not Use Peer’s Address Specify the IP address of the peer.
Page 381: Bonjour
Item Description Encapsulation Specify the operation mode of IPsec. Mode Choices: Not Use, Tunnel Mode, Transport Mode Default: Not Use Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Cancel button Click to cancel the entered data and return to the Network - TCP/IP - IPsec page.
Page 382 Item Description Bonjour Name Specify the Bonjour name for the printer. Range: Up to 63 characters Default: KONICA MINOLTA magicolor 5670(xx:xx:xx) KONICA MINOLTA magicolor 5650(xx:xx:xx) “xx:xx:xx” refers to the last six digits of the MAC address (in hexadecimal). Priority Protocol Specify the connection protocol given priority with Bonjour.
Page 383: Wsd
The Network - WSD window allows you to configure the following items: Item Description WSD Print Select whether to enable or disable the WSD print function. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - TCP/ IP - WSD PRINT - ENABLE Secure Mode Select whether or not WSD communication is performed...
Page 384 Item Description Device Name Displays the Device name. Default: KONICA MINOLTA magicolor 5670(xx:xx:xx) KONICA MINOLTA magicolor 5650(xx:xx:xx) Specify the settings from the System - Machine Settings page. Device Location Displays the Device location. Default: [Blank] Specify the settings from the System - Machine Settings page.
Page 385: Netware
NetWare NetWare The Network - NetWare - NetWare window allows you to configure the fol- lowing items Item Description NetWare NetWare Print Enables or Disables the NetWare print option. Choices: Enable, Disable Default: Disable Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - NETWARE - ENABLE Configuring the Printer...
Page 386 Item Description Frame Type Specifies the Frame Type. Choices: Auto, Ethernet 802.2, Ethernet 802.3, Ethernet II, Ethernet SNAP Default: Auto Mode Specifies the NetWare Configuration mode. Choices: Disable, PServer, NPrinter/ RPrinter Default: Disable PServer Print Server Sets the Print Server Name for the printer. Name Range: Up to 63 characters Default: MC5670-xxxxxx...
Page 387 Item Description Preferred NDS Sets the Preferred NDS Context for the Context Name printer. Range: Up to 191 characters Default: [Blank] Preferred NDS Sets the Preferred NDS Tree for the Tree Name printer. Range: Up to 63 characters Default: [Blank] NPrinter/ Printer Name Sets the printer’s name.
Page 388 NetWare Status The Network - NetWare - NetWare Status window allows you to configure the following items: Item Description File Server Identifies current NetWare File Server. Queue Name Identifies current NetWare queue name. Queue Status Identifies current NetWare status. Configuring the Printer...
Page 389: Ipp
The Network - IPP window allows you to configure the following items. For details on IPP, refer to chapter 7, “Network Printing.” In order to apply the set- tings, the printer must be turned off, then on again after the setting is speci- fied.
Page 390 Sets whether or not to accept IPP Job. Choices: Enable, Disable Default: Enable Printer Name Displays the printer’s name. Range: Up to 127 characters Default: KONICA MINOLTA magicolor 5670(xx:xx:xx) KONICA MINOLTA magicolor 5650(xx:xx:xx) Specify the settings from the System - Machine Settings page.
Page 391 Item Description Operational Print Job If this check box is selected, Print Job is Support enabled. Default: Checked Validate Job If this check box is selected, Validate Job is enabled. Default: Checked Cancel Job If this check box is selected, Cancel Job is enabled.
Page 392 Item Description Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Configuring the Printer...
Page 393: Ftp
Server The Network - FTP - Server window allows you to configure the following items: Item Description FTP Server Enables or Disables the FTP server. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - TCP/IP - FTP - ENABLE Apply button Applies the configuration settings for this window.
Page 394: Snmp
SNMP The Network - SNMP window allows you to configure the following items: Item Description SNMP SNMP If Enable is selected, SNMP is enabled. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - TCP/IP - SNMP - ENABLE SNMP v1/ If Enable is selected, SNMP v1/v2c(IP) is enabled.
Page 395 Item Description SNMP If Enable is selected, SNMP v3(IP) is enabled. v3(IP) Choices: Enable, Disable Default: Enable SNMP If Enable is selected, SNMP v1(IPX) is enabled. v1(IPX) Choices: Enable, Disable Default: Enable UDP Port Specifies the UDP port number. Range: 1 - 65535 Default: 161 SNMP v1/ Read...
Page 396 Item Description Read Specifies the security level for read only user. Security Choices: None, Auth-password, Auth-password/ Level Priv-password Default: Auth-password/Priv-password Read Specifies the read only user authentication pass- Auth-pass- word to be used for authentication. word Range: 8 to 32 characters Default: AuthPassword Read Specifies the read only user privacy password to be...
Page 397 Item Description Trap Set- Allow Set- Specifies whether or not to permit the Trap settings tings ting Choices: Allow, Restrict Default: Allow Trap Set- Specifies whether to enable or disable the Trap set- ting When tings when authentication failed. Authenti- Choices: Enable, Disable cation Default: Disable...
Page 398: Appletalk
AppleTalk The Network - AppleTalk window allows you to configure the following items: Item Description AppleTalk If Enable is selected, AppleTalk is enabled. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - APPLETALK - ENABLE Printer Name Sets the printer name.
Page 399: Email
Item Description Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Email Send Email Configuring the Printer...
Page 400 The Network - Email - Send Email window allows you to configure the fol- lowing items: Item Description Send Send If Enable is selected, sending Email is enabled. Email Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - TCP/IP - SMTP - ENABLE SMTP Specifies the address of the mail transmission...
Page 401: Ssl/Tls
Item Description Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. * Always enter these addresses without leading zeros. For example, 131.011.010.001 should be entered as 131.11.10.1. SSL/TLS SSL/TLS Information The Network - SSL/TLS - SSL/TLS Information page allows you to specify SSL/TLS settings.
Page 402: Ssl/Tls Setting (When A Certificate Is Not Installed)
SSL/TLS Setting (When a certificate is not installed) The Network - SSL/TLS - SSL/TLS Setting page allows you to select the fol- lowing SSL/TLS settings that appear. Item Description Create a self-signed Creates a self-signed certificate. Certificate Request a certificate Creates data for requesting that a certificate be issued from a certificate authority.
Page 403: Ssl/Tls Setting (When A Certificate Is Installed)
SSL/TLS Setting (When a certificate is installed) The Network - SSL/TLS - SSL/TLS Setting page allows you to select the fol- lowing SSL/ TLS settings that appear. Item Description Request a certificate Creates data for requesting that a certificate be issued from a certificate authority.
Page 404: Self-Signed Certificate Setting
Self-signed Certificate Setting The Network - SSL/TLS - Self-signed Certificate Setting page allows you to create a certificate and specify SSL settings. Item Description Common Name Identifies the Common Name for the printer, to be used in creation of an SSL Certificate. It is com- prised of “Printer Host Name.
Page 405 Item Description Locality Specify the name of the municipality. Range: Up to 127 characters Default: [Blank] State/Province Specify the name of the state or province. Range: Up to 127 characters Default: [Blank] Country Specify the name of the country as a country code regulated by ISO03166.
Page 406: Request A Certificate
Request a certificate The Network - SSL/TLS - Request a Certificate page allows you to config- ure the following items: Item Description Common Name Identifies the Common Name for the printer, to be used in creation of an SSL Certificate. It is com- prised of “Printer Host Name.
Page 407 Item Description Locality Specifies the name of the municipality. Range: Up to 127 characters Default: [Blank] State/Province Specifies the name of the state or province. Range: Up to 127 characters Default: [Blank] Country Specify the name of the country as a country code regulated by ISO03166.
Page 408: Certificate Request
Certificate Request The Network - SSL/TLS - Certificate Request page displays the data that will be submitted to the certificate authority to request that a certificate be issued. Item Description Certificate Request Displays the data that should be submitted to the certificate signing authority.
Page 409: Install A Certificate
Install a Certificate The Network - SSL/TLS - Install a Certificate page allows you to install the certificate issued by the certificate authority. Item Description Install a Certificate Signed CSR (Certificate Signing Request) should be pasted to this text area. Next button Click to display the Network - SSL/TLS - Encryp- tion Strength Setting page.
Page 410: Encryption Strength Setting
Encryption Strength Setting This menu item appears if a certificate is installed. The Network - SSL/TLS - Encryption Strength Setting page allows you to specify the encryption level. Item Description Encryption Strength Specify the encryption level. Choices: AES_256bits, 3DES_168bits, RC4_128bits, DES_56bits or RC4_40bits 3DES_168bits, RC4_128bits, DES_56bits or RC4_40bits...
Page 411: Remove A Certificate
Item Description Back button Returns to the previous screen. Cancel button Click to return to the Network - SSL/TLS - SSL/ TLS Information page. Remove a Certificate This menu item appears if a certificate is installed. The Network - SSL/TLS - Remove a Certificate page allows you to delete the installed certificate.
Page 412: Mode Using Ssl/Tls
Mode Using SSL/TLS This menu item appears if a certificate is installed. The Network - SSL/TLS - Mode Using SSL/TLS page allows the SSL trans- mission mode to be specified. Item Description Mode using SSL/TLS Selects the SSL transmission mode. Choice: Disable, Enable Default: Disable Apply button...
Page 413: Authentication
Authentication User Authentication The Network - Authentication - User Authentication page allows you to specify user authentication settings. This page appears only if a hard disk kit or a CompactFlash card is installed. When User Authentication or Account Track is set to On and Pub- lic Access is set to Restrict on this page, printing is not possible except from a host where authentication settings can be specified (Windows printer driver or PageScope Direct Print).
Page 414 Item Description Public Access Select whether or not logon as a Public user is per- mitted when authentication settings have been speci- fied. Choices: Allow, Restrict Default: Allow Account Track Select whether or not account authentication is per- formed. Choices: On, Off Default: Off Account Track Specify the account track authentication method.
Page 415 Auto Logout Network - Authentication - Auto Logout window allows you to configure the following items. Item Description Admin. Mode Logout Specify the length of time to automatically log off Time from Administrator mode. Range: 1 - 60 (Minutes) Default: 10 User Mode Logout Specify the length of time to automatically log off Time...
Page 416 IEEE802.1x The Network - Authentication - IEEE802.1x window allows you to configure the following items: Item Description IEEE802.1x Select whether to enable or disable the IEEE802.1x function. Choices: Enable, Disable Default: Disable Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - IEEE802.1X - ENABLE EAP Type Select the type of authentication used with...
Page 417 Item Description User ID Specifies the account name, when EAP Type is set to EAP-MD5, EAP-TLS, EAP-TTLS, PEAP, LEAP or Server Specification. Range: Up to 128 characters Default: [Blank] Password Specifies the password, when EAP Type is set to EAP-MD5, EAP-TLS, EAP-TTLS, PEAP, LEAP or Server Specification.
Page 418 Item Description Client Certificate Shows whether or not a client certificate has been specified. Specify the settings from the Network - SSL/ TLS page. CA Certificate Shows whether or not a CA certificate has been specified for CA reliability verification of server cer- tificates.
Page 419 CA Certificate CA Certificate Information The Network - Authentication - CA Certificate - CA Certificate Informa- tion window allows you to specify CA Certificate settings. As a default, CA Certificate is not installed. Click Setting to create a certificate and specify the CA Certificate settings. Item Description Setting button...
Page 420 CA Certificate Setting (When a certificate is installed) The Network - Authentication - CA Certificate - CA Certificate Setting page allows you to select the following CA Certificate settings that appear. Item Description Remove a Certificate Removes the certificate. Next button Click to display the selected page.
Page 421 CA Certificate Setting (When a certificate is not installed) The Network - Authentication - CA Certificate - CA Certificate Setting page allows you to select the following CA Certificate settings that appear. Item Description Install a Certificate Installs the certificate issued by the certificate authority.
Page 422 Install a Certificate The Network - Authentication - CA Certificate - Install a Certificate page allows you to install the certificate issued by the certificate authority. Item Description Install a Certificate Signed CSR (Certificate Signing Request) should be pasted to this text area. Next button Click to display the Network - Authentication - CA Certificate - Install a Certificate page.
Page 423 Remove a Certificate The Network - Authentication - CA Certificate - Remove a Certificate page allows you to delete the installed certificate. Item Description OK button Click to display a confirmation message. Click OK in the confirmation message to delete the certificate. Back button Click to return to the Network - Authentication - CA Certificate - CA Certificate Setting page.
Page 424 Configuring the Printer...
Page 425 Index Bonjour, PageScope Web Connection 361 Account Mode, PageScope Web BOOTP 171, 188 Connection 223 Active job list, PageScope Web Connection Print job status 241 CA certificate information, Admin Password 290 PageScope Web Connection 399 Administrator Mode 226 CA certificate setting, PageScope Administrator Mode, PageScope Web Web Connection 401 Connection 226...
Page 426 Printer, via PageScope Web Accessing 167 Connection 264 AppleTalk 177 Configuration, PageScope Web ARP/PING 171 Connection 264 Bonjour 172 AppleTalk 378 BOOTP 171 Camera Direct Settings 256, 333 DHCP 171 Certificate request 388 Dynamic DNS 173 Email 379 FTP 172 Encryption strength setting 390 Gateway 171 FTP 373...
Page 427 Checking print jobs 151 PPD file, installing 135 IEEE802.1x 189 Print settings 146 IEEE802.1x, PageScope Web Printer driver settings 139 Connection 396 System requirements 134 IKE Settings, PageScope Web Troubleshooting 152 Connection 357 Local interface, PageScope Web Install a certificate, PageScope Web Connection 305 Connection 389, 402 LPD/LPR 189...
Page 428 Job 241 Job Log 277 Page setup settings 67 Local interface 305 Custom paper size options 69 Login Page 223 Page attributes options 68 Mode using SSL/TLS 392 PageScope Web Connection 216 Navigation 221 Account Track Registration 225 NetWare 365 Active job 241 Online Assistance 238, 275 Active Job List 302...
Page 429 Password, PageScope Web Rendezvous 31 Connection 290 USB connection 27, 36 PCL font, PageScope Web Printer status 227 Connection 258 Printing with NetWare 154 PCL settings, PageScope Web Protocols, network Connection 250, 320 BOOTP 188 Port 9100 191 DHCP 188 Print Center HTTP 188 AppleTalk 13...
Page 430 SNMP, PageScope WSD, print 191 Web Connection 374 SSL/TLS information, PageScope Web Connection 381 XPS driver SSL/TLS setting, PageScope Web Defaults 125 Connection 382 Options 125 Status monitor 164 Printer driver settings 129 Status Notification Settings 298 Printer driver, installing 118 Subnet mask 170, 181 XPS settings, PageScope Web Manual setting 183...

This manual is also suitable for:

Magicolor 5650en

Konica Minolta magicolor 5670EN Reference Manual

1 Operation on Mac os X

System Requirements for the Printer Driver

Installing the Printer Driver

Uninstalling the Printer Driver

Print Center Settings (Mac os X 10.2.8)

Printer Setup Utility Settings (Mac os X 10.3)

Printer Setup Utility Settings (Mac os X 10.4)

Printer Settings (Mac os X 10.5/10.6)

Selecting Print Options

Specifying Page Setup Settings

Specifying Print Settings (Mac os X 10.5/10.6)

Specifying the Color Profile

Troubleshooting

2 Operation on the XPS Driver for Windows

Installing the Printer Driver

Selecting Print Options/Defaults

Uninstalling the Printer Driver

Specifying Printer Driver Settings

3 Operation on Linux

System Requirements for the Printer Driver

Installing PPD File from the Command Line

Adding the Printer

Specifying Printer Driver Settings

Printing a Document

Checking Print Jobs

Troubleshooting

4 Operation on Netware

Printing with Netware

5 Printer Utilities

Installing Printer Utilities on Windows

6 Understanding the Ethernet Configuration Menus

Ethernet Menu

7 Network Printing

Network Connection

Network Printing

Troubleshooting

8 Using Pagescope Web Connection

About Pagescope Web Connection

Setting up the Printer Web

Understanding the Pagescope Web Connection Window

Logging on to Pagescope Web Connection

Viewing Printer Status

Configuring the Printer

Quick Links

Reference Guide

Troubleshooting

Related Manuals for Konica Minolta magicolor 5670EN

Summary of Contents for Konica Minolta magicolor 5670EN