Konica Minolta DRYPRO Model 793 Operation Manual page 24

Ch.2 Product Outline
2-1-4 Main Unit without Outer Covers
1) Lever-A
2) Lever-B 4) Cover-B
1) Lever-A (green)
Locks the Deodorant Filter Case.
2) Lever-B (green)
Unlock this lever when opening the Left
Cover.
3) Lever-C (green)
Unlock this lever when opening the
Right Cover.
4) Cover-B
When a film jam occurs in the path
between the Descent Transport unit and
the Justification unit, open this cover to
send the jammed film to the Descent
Transport unit.
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
7) Deodorant Filter Case
6) Deodorant Filter
5) Cover-C 3) Lever-C
5) Cover-C
When a film jam occurs in the path
between the Justification unit and the
Elevator Transport unit , open this cover
to send the jammed film to the Elevator
Transport unit.
6) Deodorant Filter
Removes the odor that is generated
during Heat Processing. It is necessary
to regularly change the Deodorant Fil-
ter.
7) Deodorant Filter Case
Contains the Deodorant Filter. To
change the Deodorant Filter, open the
cover for the Deodorant Filter Case.
When a film jam occurs in the HPRO ~
Film Discharge unit, remove the
Deodorant Filter Case to take the
jammed film out.
Housing (yellow)
< 22 >
p.128 Resolving
the Film Jam
Be careful not to touch
the Deodorant filter
Housing (yellow) when
pulling out the Deodor-
ant Filter Case.
Deodorant Filter Hous-
ing is heated above
100:, and touching it
may cause burn.
Levers and knobs in the
DRYPRO 793 are
painted in different col-
ors depending on the
purpose of use.
Blue : For mainte-
nance and
inspection
Green : For removal of
jam films.