Previous Print - Konica Minolta DRYPRO Model 793 Operation Manual

Ch.4 Maintenance Mode
4-4-2 PREVIOUS PRINT <PRINT SETUP>
The DRYPRO 793 stores in the HDD, the print data that has been already printed. This
allows reprint of the data previously printed. How to reprint the data is detailed below.
Specifying the image data for reprint.
Print data on the DRYPRO 793 is managed per diagnostic device. Serial number
indicating the printed order from that diagnostic device is assigned to each print data.
Image to reprint can be specified by specifying this printed order. (this printed order is
also printed on the output film as a stamp)
Film Edge
1001 P 300 20 32768 662 115301771170003 1,0R01
3
5
4
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
Film Control No.. Input Device
1
Switch to the Maintenance Mode.
2
Touch the [Print Setup] button on the "Mainte-
nance" screen.
3
Touch the [PREVIOUS PRINT] button.
- "Input device" screen will be displayed.
- Touch the [RETURN] button to return to the Normal
screen after shutting down the Maintenance Mode.
4
Based on the "Device Name" printed on the edge
of the film that should be reprinted, scroll the
page with the [Scroll] button, and display the but-
ton for the device whose data should be reprint-
5
Touch the button for the device whose data
should be reprinted.
- "Reprint Data Select" screen will be displayed.
6
Based on the "PAGE" printed on the edge of the
film that should be reprinted, select the corre-
sponding print data using the arrow [▲], [▼] but-
tons.
- Selected print data will be displayed in white.
6
< 57 >
Disp
Ope
Maximum 50 of reprint
jobs can be redisteres
at a time.
Page No..
CH1:MRI-1 PAGE:4
Note that scrolling will
be kept while the arrow
[▲],[▼] buttons are
touched.
User Level
1 2 3
● ●
● ●
p.52 Switching to
the Mainte-
nance Mode