Test Print - Konica Minolta DRYPRO Model 793 Operation Manual

Ch.4 Maintenance Mode
4-4-4 TEST PRINT <PRINT SETUP>
Prints an internal SMPTE pattern that is used for density calibration.
How to print the SMPTE pattern is detailed below.
3
5
4
Description of [SUPPLY TRAY] button display
From the left, output tray information, that are "Tray No.", "Film Size", "Film Type",
"Copies" are displayed on the [SUPPLY TRAY] button.
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
1
Switch to the Maintenance Mode.
2
Touch the [PRINT SETUP] button on the "Main-
tenance" screen.
3
Touch the [TEST PRINT] button.
- "CH SELECT" screen will be displayed.
- Touching the [RETURN] button shuts down the Mainte-
nance Mode, and returns to the Normal screen.
4
Scroll the page with the [Scroll] button to display
the button for the input device for which the test
print should be made.
5
Touch the button of the input device for which
the test print should be made.
- "Output Tray Select" screen will be displayed.
- Touching the [RETURN] button shuts down the Mainte-
nance Mode, and returns to the Normal screen.
6
Touch the arrow buttons [t], [s] to select the
tray to which the test print is output.
6
< 62 >
User Level
1 2 3
● ● ●
Disp
● ● ●
Ope
p.52 Switching to
the Mainte-
nance Mode
Fixed print condition will
be used when "No
Select" is selected as
an input device.