Resolving The Film Jam - Konica Minolta DRYPRO Model 793 Operation Manual

Ch.6 Troubleshooting

6-3 Resolving the Film Jam

If a film jam occurs in the DRYPRO 793 during print operation, an error code together with the message and the loca-
tion of the film jam will be displayed on the Operation Panel.
How to resolve the film jam is detailed below.
1
2
The method of resolving a film jam differs depending on the location of the jam. Methods
of resolving film jams in different locations are described in the following pages.
Location of Film Jam
Cooling Unit (A)
Descent transport Unit (B)
Elevator Transport Unit (C)
Supply Tray
Sorter Transport Unit
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
1
When "INTERVAL" is selected for the error
sound in "Touch Panel " of the Maintenance
Mode, Touch the [BEEP STOP] button that
appears when an error occurs.
- Beep sound stops.
- [BEEP STOP] button disappears as the beep sound
stops.
2
Touch the [ERROR RESET] button.
- "Jam Release" wizard will be displayed. Contents of the
wizard will be different depending on the location
where the jam occurs.
3
Remove all jam films, and close all covers that
are opened.
- Displays a message indicating that the error is being
reset, and returns to the Normal screen.
< 128 >
Page
129
132
136
138
139