Konica Minolta DRYPRO Model 793 Operation Manual page 45

Ch.3 Operation
Following procedures can be skipped when only the film type should be changed and
the film size should no be changed. Load the film package likewise the procedure for
"3.4 Film Loading".
Do not put anything or lean on the Supply Tray while it is pulled out.
Doing so will damage the Supply Tray.
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
4
Gently and fully pull out the Supply Tray to its
end. (1 in the left fig.)
5
Fully open the Supply Shutter.
6
Remove the Sandwich Paper left in the Supply
Tray.
7
Lift the Pressure Plate, and pull out and remove
the Film Package that has been wound by the
Winding Shaft.
< 43 >
p.35 FILM
LOADING
Shutter cannot be
opened if the Supply
Tray is not fully pulled
out.
Follow the regulations
obliged by the facility for
the disposal of the film
package from which the
sandwich cardboard is
removed.