Konica Minolta DRYPRO Model 793 Operation Manual page 10

Ch.1 Safety Precautions & Warnings
Alert and Symbol Marks
This is the safety alert symbol and is intended to draw the attention of the user to potential dangers to the user
him/herself or to others that may arise during the use or operation of this system.
These messages must be read thoroughly and strictly observed.
All safety related precautions should be carefully read and fully understood before proceeding with assembly or
usage of this system.
● Symbols indicating the need for caution (including danger and warnings)
Normal Caution Danger of Fire
● Symbols indicating prohibited acts
Prohibited Do not touch
● Symbols indicating essential acts (compulsory or indicated acts)
Remove the plug from
Ground
the power outlet
● Other Symbols
Main Power
AC Voltage
Supply OFF
(Power Supply)
Warning Text (Signal Word)
Signal words indicate the degree of potential hazards in the product.
There are 3 degrees of caution labels, and each is used depending on the level of risk and damage caused by
incorrect use and mishandling.
DANGER
WARNING
CAUTION
Bodily injury
(and damage to property)
Damage to property only
NOTE : If the contents of this page are not legible, order a new manual.
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
Safety Alert Symbol
Description of Graphic Symbols
Danger of
Danger of High
Electrocution
Temperature
Do not disassemble Do not touch
with wet hand
Main Power
Main Power
Supply ON
Standby
: Failure to observe the caution will produce high risk of serious or fatal injury.
: Failure to observe the caution will produce moderate risk of serious or fatal injury.
: Failure to observe the caution will produce risk of moderate or light injury.
Loss of life or serious injury
(Damage is serious)
Moderate damage or light injury
(Damage is light)
Danger of
Rotation
Multi-Leads
Do not expose Mobile
Prohibited
to moisture Prohibited
Risk of the damage
High
DANGER
or
WARNING CAUTION
CAUTION
< 8 >
Low
WARNING
CAUTION