View Options - Raritan Dominion KX II-101-V2 User Manual

Chapter 3: Working with Target Servers
68
Configure Scan Settings in VKC and AKC
The KX II and LX provide a port scanning feature that searches for
selected targets and displays them in a slide show view, allowing you to
monitor up to 32 targets at one time. You can connect to targets or focus
on a specific target as needed. Scans can include standard targets,
blade servers, tiered Dominion devices, and KVM switch ports. Configure
scan settings from either the Virtual KVM Client (VKC) or Active KVM
Client (AKC). See Configure Scan Settings in VKC and AKC for more
information. See Scanning Ports. Use the Scan Settings tab to customize
the scan interval and default display options.
To set scan settings:
1. Click Tools > Options. The Options dialog appears.
2. Select the Scan Settings tab.
3. In the "Display Interval (10-255 sec):" field, specify the number of
seconds you want the target that is in focus to display in the center of
the Port Scan window.
4. In the "Interval Between Ports (10 - 255 sec):" field, specify the
interval at which the device should pause between ports.
5. In the Display section, change the default display options for the
thumbnail size and split orientation of the Port Scan window.
6. Click OK.

View Options

View Toolbar
You can use the Virtual KVM client with or without the toolbar display.
To toggle the display of the toolbar (on and off):

Choose View > View Toolbar.
View Status Bar
By default, the status bar is displayed at the bottom of the target window.
To hide the status bar:

Click View > Status Bar to deselect it.
To restore the status bar:

Click View > Status Bar to select it.