Download  Print this page


Note: During the warming process, the milk circulates to ensure even
warming. It takes about 10 minutes to warm 90ml/3oz of room-temperature
milk. It takes slightly longer to warm cold milk or a large amount of milk.
Caution: Do not take the bottle out of the baby bottle warmer while
the progress indicator is flashing.
When the entire progress indicator lights up continuously, the milk
has reached the set temperature.
When the milk is warm, you can either take the bottle out of the
baby bottle warmer to feed your baby right away (see section
'Feeding your baby immediately') or you can keep it warm in the
baby bottle warmer (see section 'Keeping milk warm').
Increasing the milk temperature
If you want the milk to be warmer, you can increase the milk
temperature gradually after it is ready by switching to milk warming
setting 3 and leaving the bottle in the appliance at the keep-warm
mode (Fig. 9).
If you just switched off the baby bottle warmer or if it just switched
off automatically, switch it back on without removing the warm
water from it, and follow the above step (Fig. 10).
The baby bottle warmer switches off automatically after 20 minutes
of keep-warm mode (Fig. 11).
Feeding your baby immediately
Press the on/off button to switch off the appliance and take out the
milk bottle (Fig. 10).
Always check the temperature of the milk before you feed your
baby. Gently swirl the milk in the bottle and check the temperature
of the milk by sprinkling a few drops on the inside of your wrist
(Fig. 12).
Unplug the appliance and empty the baby bottle warmer (Fig. 13).


   Also See for Philips AVEnT scf356

Comments to this Manuals

Symbols: 0
Latest comments: