Manual Staple - Kyocera Taskalfa Pro 15000c Operation Manual

Finishing Paper > Manual Staple

Manual Staple

You can staple copied paper manually without any print operation. It is useful when you have forgotten to set the staple
sort mode before starting copying, or when you want to staple originals.
NOTE
• This function requires the optional Document Finisher:
4,000-sheet Finisher (DF-9100) (page 20-13)
• If there are no staples when manual stapling is performed, the stapling position lamps and stapling position key
LEDs all blink. Add staples.
Replacing Staples (4,000-sheet Finisher) (page 17-13)
• Manual stapling cannot be executed when the machine is in operation.
Maximum number of sheets available for manual stapling
Paper size
A4-R, A4, B5-R, B5, Letter-R, Letter
12"×18",A3, B4, Ledger, Legal
Use the keys on the control section of the Finisher (optional) for manual stapling.
1
1
2
Paper weight
(75 to 90 g/m
100 sheets
50 sheets
2 3
Press the stapling position key on the stapling control section.
The shutter of the paper exit area is opened and this equipment enters into the manual staple
mode.
Set the staple position.
Press the stapling position key to select the stapling position (Back
Operation is not possible while the stapling position lamps are blinking. Operate after the
lamps light solidly.
Paper weight
2
) (91 to 105 g/m
70 sheets
35 sheets
8-11
2
)
1 Stapling position lamps
2 Stapling position key
3 Stapling key / lamp
/ Front / 2 Points ).