Layer 2 Protocol Tunneling Settings - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Click the Show All VLAN Translation Profile button to the return to the main page.

Layer 2 Protocol Tunneling Settings

This window is used to configure the layer 2 Protocol tunneling port settings.
To view the following window, click L2 Features > Layer 2 Protocol Tunneling Settings, as shown below:
The fields that can be configured are described below:
Parameter
Layer 2 protocol
tunneling State
From Port / To Port
Type
Tunneled Protocol
Figure 5-42 VLAN Translation Profile List window (Show Match)
Figure 5-43 Layer 2 Protocol Tunneling Settings window
Description
Use the radio buttons to enable or disable the layer 2 protocol tunneling function
globally on the Switch.
Select a range of ports to use in the configuration.
Use the drop-down menu to select the type of the ports. Available choices are UNI, NNI
and None. The default type is None.
When UNI is selected in the Type drop-down menu, this drop-down menu shows the
128