D-Link xStack DGS-3620 Series Reference Manual page 572

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
L2
L3
Type
Figure 12-17 CPU Port Statistics window (SI Mode Only)
Description
Select to display statistic counters of all Layer 2 control packets.
Select to display statistic counters of Layer 3 control packets.
Unicast - Select to display statistic counters of Layer 3 unicast routing and Layer 3
application control packets.
Multicast - Select to display statistic counters of Layer 3 multicast routing control
packets.
All - Select to display statistic counters of all Layer 3 routing control packets.
Select the type of packet that will be displayed. The protocol subtype will be displayed.
LACP - Select to display packet type LACP.
STP - Select to display packet type STP.
GVRP - Select to display packet type GVRP.
ERPS - Select to display packet type ERPS.
CFM - Select to display packet type CFM. (EI Mode Only)
802.1X - Select to display packet type 802.1X.
LLDP - Select to display packet type LLDP.
OAM - Select to display packet type OAM.
Stacking - Select to display packet type Stacking.
CTP - Select to display packet type CTP.
OSPFv2 - Select to display packet type OSPFv2.
571