Dhcpv6 Server Interface Settings - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Address
End Network
Address
Network Address
Assigned Len
Interface Name
Domain Name
DNS Server
Preferred Lifetime
(60-4294967295)
Valid Lifetime (60-
4294967295)
Click the <<Back button to return to the previous window.
Click the Apply button to accept the changes made.
DHCPv6 Server Dynamic Binding
This window is used to show the DHCPv6 dynamic binding information.
To view this window, click Network Application > DHCP > DHCPv6 Server > DHCPv6 Server Dynamic Binding
as shown below:
The fields that can be configured are described below:
Parameter
Pool Name
Click the Clear button to clear all the information entered in the fields.
Click the Find button to locate a specific entry based on the information entered.
Click the Clear All button to remove all the entries listed in the table.
Click the View All button to display all the existing entries.

DHCPv6 Server Interface Settings

This window is used to display and configure the DHCPv6 Server state per interface
To view this window, click Network Application > DHCP > DHCPv6 Server > DHCPv6 Server Interface Settings
as shown below:
Enter the ending IPv6 network address of the DHCPv6 pool.
Enter the IPv6 network address of the DHCPv6 pool.
Enter the assigned length value here.
Enter the interface name used here.
The domain name is used by client when resolving hostnames with DNS.
Enter the DNS server IPv6 address for this pool. Users may specify up to two DNS
server addresses.
The amount of time (in seconds) that the IPv6 address, based on the specified pool,
remains in preferred state.
The amount of time (in seconds) that the IPv6 address, based on the specified pool,
remains in valid state.
Figure 10-27 DHCPv6 Server Dynamic Binding Table window
Description
Enter the name of the DHCPv6 pool for which to view dynamic binding information.
520