D-Link xStack DGS-3620 Series Reference Manual page 291

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Override Dynamic
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specific entry.
PIM for IPv6 Neighbor Table
This window is used to display the current PIM for IPv6 neighbor router table.
To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv6 > PIM for
IPv6 Neighbor Table, as shown below:
The fields that can be configured are described below:
Parameter
Interface Name
Click the Find button to find the interface entered.
Click the View All button to view all PIM for IPv6 neighbors on this switch.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
PIM for IPv6 Multicast Route Table
This window is used to display the current PIM for IPv6 multicast route table.
To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv6 > PIM for
IPv6 Multicast Route Table, as shown below:
Tick the check box so that the static RP will override any dynamically learned RP.
Figure 6-122 PIM for IPv6 Neighbor Table window
Description
Enter the name of the IP interface for which you want to display the current PIM for
IPv6 neighbor routing table.
290