D-Link xStack DGS-3620 Series Reference Manual page 218

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Destination Protocol
Source Protocol
Type
Metric (0-16)
Route Map Name
Click the Apply button to accept the changes made for each individual section.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
When selecting OSPF as the Destination Protocol, the following window will be displayed.
The fields that can be configured are described below:
Parameter
Destination Protocol
Figure 6-19 Route Redistribution Settings (RIP)
Description
Use the drop-down menu to select the destination protocol. Options to choose from
are RIP, OSPF, and BGP (EI Mode Only).
Use the drop-down menu to select the source protocol. Options to choose from are
RIP, OSPF, BGP (EI Mode Only), Static, and Local.
When OSPF is select as the Source Protocol, the following parameters will be
available for selection:
All - To redistribute both the OSPF AS-internal route and OSPF AS-external route to
RIP or BGP.
Internal - To redistribute only the OSPF AS-internal routes.
External - To redistribute only the OSPF AS-external routes, including Ext Type1 and
Ext Type2 routes.
Ext Type1 - To redistribute only the OSPF AS-external type-1 routes.
Ext Type2 - To redistribute only the OSPF AS-external type-2 routes.
Inter+E1 - To redistribute only the OSPF AS-external type-1 and OSPF AS-internal
routes.
Inter+E2 - To redistribute only the OSPF AS-external type-2 and OSPF AS-internal
routes.
Enter the RIP metric value for the redistributed routes.
Enter a route map which will be used as the criteria to determine whether to
redistribute specific routes.
Figure 6-20 Route Redistribution Settings (OSPF)
Description
Use the drop-down menu to select the destination protocol. Options to choose from
217