D-Link xStack DGS-3620 Series Reference Manual page 285

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Interface Name
Neighbor IP Address
Neighbor Netmask
Click the Find button to find the interface name and neighbor IP address/netmask entered.
Click the View All button to view all PIM neighbors on this switch.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
PIM Multicast Route Table
This window is used to display the current PIM multicast route table.
To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv4 > PIM
Multicast Route Table, as shown below:
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
PIM RP-Set Table
This window is used to display list all the RP-Set information.
To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv4 > PIM
RP-Set Table, as shown below:
The fields that can be configured are described below:
Figure 6-112 PIM Neighbor Table window
Description
Enter the name of the IP interface for which you want to display the current PIM
neighbor routing table.
Enter the IP address of the destination.
Enter the netmask of the destination.
Figure 6-113 PIM Multicast Route Table window
Figure 6-114 PIM RP-Set Table window
284