D-Link xStack DGS-3620 Series Reference Manual page 539

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Click the Apply button to accept the changes made.
After clicking the MIP Port Table button, the following page will appear:
Click the <<Back button to return to the previous page.
After clicking the Add MEP button, the following page will appear:
The fields that can be configured are described below:
Parameter
MEP Name
MEP ID (1-8191)
Port
MEP Direction
Click the Add button to add a new entry based on the information entered.
Click the <<Back button to discard the changes made and return to the previous page.
Click the View Detail link to view more information regarding the specific entry.
Click the Delete button to remove the specific entry.
NOTE: The MEP Name value should not be more than 32 characters.
After clicking the View Detail
By default, there is no MEP ID in a newly created maintenance association.
Figure 11-4 CFM MIP Port Table window
Figure 11-5 CFM MEP Settings (Add) window
Description
Enter an MEP name. It is unique among all MEPs configured on the device.
Enter an MEP ID configured in the MA's MEP ID list.
Use the drop-down menu to select a unit ID and port number. This port should be a
member of the MA's associated VLAN.
This is the MEP direction.
Inward - Inward facing (up) MEP.
Outward - Outward facing (down) MEP.
link, the following page will appear:
538