D-Link xStack DGS-3620 Series Reference Manual page 435

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The user may also select the desired time interval to update the statistics, between 1s and 60s, where "s" stands
for seconds. The default value is one second.
The fields that can be configured are described below:
Parameter
ServerIndex
InvalidServerAddr
Identifier
ServerAddr
ServerPortNumber
RoundTripTime
Requests
Retransmissions
Responses
Figure 9-24 RADIUS Account Client window
Description
The identification number assigned to each RADIUS Accounting server that the client
shares a secret with.
The number of RADIUS Accounting-Response packets received from unknown
addresses.
The NAS-Identifier of the RADIUS accounting client.
The IP address of the RADIUS authentication server referred to in this table entry.
The UDP port the client is using to send requests to this server.
The time interval between the most recent Accounting-Response and the Accounting-
Request that matched it from this RADIUS accounting server.
The number of RADIUS Accounting-Request packets sent. This does not include
retransmissions.
The number of RADIUS Accounting-Request packets retransmitted to this RADIUS
accounting server. Retransmissions include retries where the Identifier and Acct-
Delay have been updated, as well as those in which they remain the same.
The number of RADIUS packets received on the accounting port from this server.
434