D-Link xStack DGS-3620 Series Reference Manual page 606

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Parameters description:
ipv6address: IPv6 prefix obtained from a delegation router.
intf-name: Name of the DHCPv6 client PD interface.
DHCPv6 Relay Event description: DHCPv6 relay on a specify interface's administrator state changed
Log Message: DHCPv6 relay on interface <ipif-name> changed state to [enabled | disabled]
Parameters description:
<ipif-name>: Name of the DHCPv6 relay agent interface.
DHCPv6 Server Event description: The address of the DHCPv6 Server pool is used up
Log Message: The address of the DHCPv6 Server pool <pool-name> is used up.
Parameters description:
<pool-name>: Name of the DHCPv6 Server pool.
Event description: The number of allocated ipv6 addresses is equal to 4096
Log Message: The number of allocated ipv6 addresses of the DHCPv6 Server pool is equal
to 4096.
Parameters description:
IP Directed Event description: IP Directed-broadcast rate exceed 50 packets per second on a certain
Broadcast subnet.
Log Message: IP Directed Broadcast packet rate is high on subnet. [(IP: %s)]
Parameters description:
IP: the Broadcast IP destination address.
Event description: IP Directed-broadcast rate exceed 100 packets per second
Log Message: IP Directed Broadcast rate is high.
Parameters description:
RCP Event description: Firmware upgraded successfully.
Log Message: [Unit <unitID>,] Firmware upgraded by <session> successfully. (Username:
<username>, IP: <ipaddr>, MAC: <macaddr>)
Parameters description:
unitID: Represent the id of the device in the stacking system.
session: The user's session.
username: Represent current login user.
ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Event description: Firmware upgrade unsuccessfully.
Log Message: [Unit <unitID>,] Firmware upgrade by <session> unsuccessfully. (Username:
<username>, IP: <ipaddr>, MAC: <macaddr>)
Parameters description:
unitID: Represent the id of the device in the stacking system.
session: The user's session.
username: Represent current login user.
ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Event description: Firmware uploaded successfully.
Log Message: Firmware uploaded by <session> successfully. (Username: <username>, IP:
<ipaddr>, MAC: <macaddr>)
Parameters description:
session: The user's session.
username: Represent current login user.
ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Event description: Firmware upload unsuccessfully.
Log Message: Firmware upload by <session> unsuccessfully. (Username: <username>, IP:
<ipaddr>, MAC: <macaddr>)
Parameters description:
session: The user's session.
username: Represent current login user.
ipaddr: Represent client IP address.
Event description: Configuration downloaded successfully.
Log Message: Configuration downloaded by <session> successfully. (Username:
<username>, IP: <ipaddr>, MAC: <macaddr>)
Parameters description:
session: The user's session.
username: Represent current login user.
ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Event description: Configuration download unsuccessfully.
Log Message: Configuration download by <session> unsuccessfully. (Username:
<username>, IP: <ipaddr>, MAC: <macaddr>)
Parameters description:
session: The user's session.
username: Represent current login user.
605
Informational
Informational
Informational
Informational
Informational
Informational
Warning
Informational
Warning
Informational
Warning