Vlan Precedence Settings - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
VLAN Name
VID
VID List
IPv4 Network Address
IPv6 Network Address
Click the Add button to add a new entry based on the information entered.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specific entry based on the information entered.
Click the Show All button to display all the existing entries.
Click the Delete All button to remove all the entries listed.

VLAN Precedence Settings

This window is used to configure VLAN precedence settings.
To view the following window, click L2 Features > VLAN > Subnet VLAN > VLAN Precedence Settings, as
shown below:
The fields that can be configured are described below:
Parameter
Enter a VLAN Name.
Enter a VLAN ID.
Enter a list of VLAN IDs.
The user can enter the IPv4 address used in here. Remember to include the subnet
mask using the / notation.
The user can enter the IPv6 address used in here. Remember to include the subnet
mask using the / notation.
Figure 5-18 VLAN Precedence Settings window
Description
110