Ssh Settings - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Public Key.
Configure the encryption algorithm that SSH will use to encrypt and decrypt messages sent between the
3.
SSH client and the SSH server, using the SSH Authentication Method and Algorithm Settings window.
Finally, enable SSH on the Switch using the SSH Configuration window.
4.
After completing the preceding steps, a SSH Client on a remote PC can be configured to manage the Switch using
a secure, in band connection.

SSH Settings

Users can configure and view settings for the SSH server.
To view this window, click Security > SSH > SSH Settings as shown below:
The fields that can be configured are described below:
Parameter
SSH Server State
Max. Session (1-8)
Connection Timeout
(30-600)
Authfail Attempts (2-
20)
Figure 9-82 SSH Settings window
Description
Use the radio buttons to enable or disable SSH on the Switch. The default is
Disabled.
Enter a value between 1 and 8 to set the number of users that may simultaneously
access the Switch. The default setting is 8.
Allows the user to set the connection timeout. The user may set a time between 30
and 600 seconds. The default setting is 120 seconds.
Allows the Administrator to set the maximum number of attempts that a user may try
to log on to the SSH Server utilizing the SSH authentication. After the maximum
number of attempts has been exceeded, the Switch will be disconnected and the user
must reconnect to the Switch to attempt another login. The number of maximum
attempts may be set between 2 and 20. The default setting is 2.
494