D-Link xStack DGS-3620 Series Reference Manual page 441

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Maximum Entry (1-50)
Maximum IPv6 Entry
(1-50)
Click the Apply button to accept the changes made.
DHCP Snooping Entry
This window is used to view dynamic entries on specific ports.
To view this window, click Security > IP-MAC-Port Binding (IMPB) > DHCP Snooping > DHCP Snooping Entry
as shown below:
Figure 9-29 DHCP Snooping Max Entry Settings window
Description
Select the switch unit to configure.
Use the drop-down menus to select a range of ports to use.
Enter the maximum entry value. Tick the No Limit check box to have unlimited
maximum number of the learned entries.
Enter the maximum entry value for IPv6 DHCP Snooping. Tick the No Limit check
box to have unlimited maximum number of the learned entries.
440