D-Link xStack DGS-3620 Series Reference Manual page 484

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
method lists. The user may define the type of server group by protocol or by previously defined server group. The
Switch has four built-in Authentication Server Groups that cannot be removed but can be modified. Up to eight
authentication server hosts may be added to any particular group.
To view this window, click Security > Access Authentication Control > Authentication Server Group Settings
as shown below:
Figure 9-72 Authentication Server Group Settings – Server Group List window
This window displays the Authentication Server Groups on the Switch. The Switch has four built-in Authentication
Server Groups that cannot be removed but can be modified.
The fields that can be configured are described below:
Parameter
Group Name
Click the Add button to add a new entry based on the information entered.
Click the Edit button (or the Edit Server Group tab) to re-configure the specific entry.
Click the Edit Server Group tab to see the following window.
Description
Enter a new server group name.
483