D-Link xStack DGS-3620 Series Reference Manual page 618

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Parameters description:
ipaddr: IP address.
ipv6address: IPv6 address.
username: user name.
Event description: Successful Enable Admin authenticated by AAA local or none or server.
Log Message: Successful Enable Admin through <Console | Telnet | Web(SSL)| SSH> from
<ipaddr | ipv6address> authenticated by AAA <local | none | server <ipaddr | ipv6address>>
(Username: <username>).
Parameters description:
local: enable admin by AAA local method.
none: enable admin by AAA none method.
server: enable admin by AAA server method.
ipaddr: IP address.
ipv6address: IPv6 address.
username: user name.
Event description: Enable Admin failed due to AAA server timeout or improper configuration.
Log Message: Enable Admin failed through <Console | Telnet | Web(SSL)| SSH> from
<ipaddr | ipv6address> due to AAA server <ipaddr | ipv6address> timeout or improper
configuration (Username: <username>)
Parameters description:
ipaddr: IP address.
ipv6address: IPv6 address.
username: user name.
Event description: Enable Admin failed authenticated by AAA local or server.
Log Message: Enable Admin failed through <Console | Telnet | Web(SSL)| SSH> from
<ipaddr | ipv6address> authenticated by AAA < local | server <ipaddr | ipv6address>>
(Username: <username>).
Parameters description:
local: enable admin by AAA local method.
server: enable admin by AAA server method.
ipaddr: IP address.
ipv6address: IPv6 address.
username: user name.
Event description: Successful login authenticated by AAA local or none or server.
Log Message: Successful login through <Console | Telnet | Web(SSL) | SSH> from < ipaddr |
ipv6address > authenticated by AAA <local | none | server <ipaddr | ipv6address>>
(Username: <username>).
Parameters description:
local: specify AAA local method.
none: specify none method.
server: specify AAA server method.
ipaddr: IP address.
ipv6address: IPv6 address.
username: user name.
Event description: Login failed authenticated by AAA local or server.
Log Message: Login failed through <Console | Telnet | Web(SSL)| SSH> from <ipaddr |
ipv6address> authenticated by AAA <local | server <ipaddr | ipv6address>> (Username:
<username>).
Parameters description:
local: specify AAA local method.
server: specify AAA server method.
ipaddr: IP address.
ipv6address: IPv6 address.
username: user name.
WAC
Event description: When a client host fails to authenticate.
Log Message: WAC unauthenticated user (User Name: <string>, IP: <ipaddr | ipv6address>,
MAC: <macaddr>, Port: <[unitID:]portNum>)
Parameters description:
string: User name
ipaddr: IP address
ipv6address: IPv6 address
macaddr: MAC address
unitID: The unit ID
portNum : The port number
Event description: This log will be triggered when the number of authorized users reaches the
maximum user limit on the whole device.
Log Message: WAC enters stop learning state.
Event description: This log will be triggered when the number of authorized users is below the
maximum user limit on whole device in a time interval (5 min).
Log Message: WAC recovered from stop learning state.
Event description: When a client host authenticated successful.
617
Informational
Warning
Warning
Informational
Warning
Warning
Warning
Warning
Informational