D-Link xStack DGS-3620 Series Reference Manual page 216

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Static
Default
EBGP
IBGP
RIP
OSPF Intra
OSPF Inter
OSPF ExtT1
OSPF ExtT2
Click the Apply button to accept the changes made.
Figure 6-16 Route Preference Settings window (EI Mode Only)
Figure 6-17 Route Preference Settings window (SI Mode Only)
Description
Enter the Static route type preference value here.
Enter the Default route type preference value here.
Enter the eBGP route type preference value here. (EI Mode Only)
Enter the iBGP route type preference value here. (EI Mode Only)
Enter the RIP route type preference value here.
Enter the OSPF Intra route type preference value here.
Enter the OSPF Inter route type preference value here.
Enter the OSPF Ext Type-1 route type preference value here.
Enter the OSPF Ext Type-2 route type preference value here.
215