D-Link xStack DGS-3620 Series Reference Manual page 442

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
Port
Ports
Click the Find button to locate a specific entry based on the port number selected.
Click the Clear button to clear all the information entered in the fields.
Click the View All button to display all the existing entries.
DHCP Snooping Limit Rate Settings
This window is used to view the DHCP snooping limit rate entries.
To view this window, click Security > IP-MAC-Port Binding (IMPB) > DHCP Snooping > DHCP Snooping Limit
Rate Settings as shown below:
Figure 9-30 DHCP Snooping Entry window
Description
Select the unit you want to configure.
Use the drop-down menu to select the desired port.
Specify the ports for DHCP snooping entries. Tick the All Ports check box to select
all entries for all ports. Tick the IPv4 check box to select IPv4 DHCP snooping
learned entries. Tick the IPv6 check box to select IPv6 DHCP snooping learned
entries..
441