Authentication Server Group Settings - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
To view this window, click Security > Access Authentication Control > Accounting Settings as shown below:
The fields that can be configured are described below:
Parameter
Network
Shell
System
Administrator
Operator
Power User
User
Click the Apply button to accept the changes made.

Authentication Server Group Settings

This window is used to set up Authentication Server Groups on the Switch. A server group is a technique used to
group TACACS/XTACACS/TACACS+/RADIUS server hosts into user-defined categories for authentication using
Figure 9-71 Accounting Settings window
Description
When RADIUS Only is selected, the Switch will send network informational packets to a
remote RADIUS server. When Method List Name is selected, the Switch will send
network informational packets based on the method list created.
When RADIUS Only is selected, the Switch will send shell informational packets to a
remote RADIUS server. When Method List Name is selected, the Switch will send shell
informational packets based on the method list created.
When RADIUS Only is selected, the Switch will send system informational packets to a
remote RADIUS server. When Method List Name is selected, the Switch will send
system informational packets based on the method list created.
When selected, the accounting service for all administrator level commands will be
enabled.
When selected, the accounting service for all operator level commands will be enabled.
When selected, the accounting service for all power-user level commands will be
enabled.
When selected, the accounting service for all user level commands will be enabled.
482