D-Link xStack DGS-3620 Series Reference Manual page 118

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Surveillance VLAN
State
Surveillance VLAN
Name
Surveillance VID (1-
4094)
Priority
Aging Time (1-65535)
Log State
Click the Apply button to accept the changes made for each individual section.
Surveillance VLAN Port Settings
This window is used to show the ports surveillance VLAN information.
To view the following window, click L2 Features > VLAN > Surveillance VLAN > Surveillance VLAN Port
Settings, as shown below:
Description
The state of the surveillance VLAN.
The name of the surveillance VLAN.
The VLAN ID of the surveillance VLAN.
The priority of the surveillance VLAN, the range is 0 – 7. The default priority is 5.
The aging time to set, the range is 1 to 65535 minutes. The default value is 720
minutes. The aging time is used to remove a port from surveillance VLAN if the port is
an automatic surveillance VLAN member. When the last surveillance device stops
sending traffic and the MAC address of this surveillance device is aged out, the
surveillance VLAN aging timer will be started. The port will be removed from the
surveillance VLAN after expiration of surveillance VLAN aging timer. If the surveillance
traffic resumes during the aging time, the aging timer will be reset and stop.
Used to enable/disable sending of issue of surveillance VLAN log.
117