Basic Operations - Avery Berkel IM Series User Instructions

100
7.1

Basic operations

Logging on/off
You can only enter transactions at a machine if you are logged on to the machine.
Note: If the machine is operating in Checkout Mode you will still need to enter your PIN
when logging on.
Note: Your scales may be set with a suitable service interval. If a service interval has been
set, a notice will display as you near the service date.
Operator PIN
You may have ben assigned a PIN. Your PIN must be entered when logging on or off.
Changing your PIN
If your machine has a PIN key you may change your own PIN.
1
Operator
Num. XX
Operator Num.
2
Old PIN
Security level
Security levels are assigned to
• the scale functions on your machine.
• each operator is assigned a security level
There are 3 security levels from 0 to 2. The security level determines operator access to
scale functions.
• You will only have access to functions that have the same level or a lower level of
security than your own security level.
• Only those operators with a security level equal to or greater than the function security
are listed for selection.
Serving Customers
Enter old PIN
Supervisor/operator number
0 - 99
3
New PIN
7.1 Basic operations
Enter new PIN
IM series User Instructions