Setting Function Security - Avery Berkel IM Series User Instructions

56
4.10

Setting function security

Security levels
• There are three security levels from 0 to 2.
• The security level determines operator access to scale functions.
• The operator will only have access to those functions whose security level is the same
as or less than their own security level.
Please remember .....
If you see the message Call Supervisor your security level is not high enough.
Security level 0 means that any operator can access that function.
The following functions have factory default security levels set as follows:
Sales functions
Void
UP/PLU
Positive non weighed
Negative non weighed
Receipt/label selection
Dual capacity
Override
Price base
Returns
Refunds
No Sale
Float
Pick Up
Paid Out
Manager functions
You can assign a security level to most of the manager functions or you can change the
level set, provided that your own security level is the same or higher than the function
security.
Please remember .....
Always ensure that you have at least one operator with a security level high enough to
change Operator PIN and security level settings.
Programming the machine
1
0
0
0
0
0
1
0
1
1
0
0
0
0
4.10 Setting function security
IM series User Instructions