Programming Operators - Avery Berkel IM Series User Instructions

4.9 Programming Operators

4.9 Programming Operators
You can program details for operators so that each operator can be uniquely identified
and you can select the status of an operator to be either trading or training. You can only
change the operator status if there are no outstanding transactions against the operator.
Figure 4.15 Setting up operators
Operator names
• You can enter up to 20 operator names and you can assign dedicated keys to any
number of them.
• Each name may have up to 16 characters.
• Operator names are printed on receipts and the operator totals report.
• You can print the operator name or number on a label if you select a suitable label
format and include the appropriate substitution code (see
page 242) in the sales message text.
Operator PIN
• The factory default setting for operator 1 PIN is 4296 and for operator 1 security level
is 2.
• All other operators will have factory default settings of PIN 0 and security level 0
unless you change them.
IM series User Instructions
Operators
Operator No.
0 - 20
Operator Name.
Enter Text
PIN
Security Level
Trading
Logged On/Off Logged On/Off
Training
Enter Text
17.3, Substitution codes,
Programming the machine
53