Assigning A Barcode Format - Avery Berkel IM Series User Instructions

5.4 Assigning a barcode format

5.4 Assigning a barcode format
In order for barcodes to be printed you must assign a format to the machine.
On label machines the format assigned to the machine is used unless the PLU has a
programmed barcode. Enter a barcode reference number from 0 to 9.
On receipt machines you may enable or disable barcode printing for receipts and for
talons.
Please remember .....
For more information on creating and selecting barcode formats, see Barcodes,
Manager Mode
1................
4 Machine Setup
5..............
7
Height B/C
5 - 20mm
Figure 5.5
Trace code
The trace code is a six digit numerical code printed at the end of receipts and reports. It
is used to identify uniquely an individual machine.
Barcode height
Barcode height option allows you to set the height of barcodes on receipts and talons to
be programmable in the range of 5-20 mm in 1mm intervals. The default height is 20mm
IM series User Instructions
1
2
3Machine Barcode
4...........
1 Disabled
Trace
2 Enabled
0 - 999999
Assigning a barcode format
1 Label
2 Receipt
3 Talon
4 Trace
5 Barcode Height
Barcode Format
1 Disabled
Reference 0 - 9
2 Enabled
3 Barcd. On Subtot
4 Barcode On Total
71
page 147.
Machine Set-up