Avery Berkel IM Series User Instructions page 33

34
Deleting a character
1. Press
2. Press
Clearing the entire text entered
• Press
Enter new text if required.
PLU display text
The PLU display text allows you to enter up to 60 characters over two lines (30 characters
per line). The second line could be used to display the product text in an alternative
language.
Note: The promotional message (if any) will replace the second line of the product text.
Extended character set
You can create additional text characters using the extended character facility and
entering the appropriate numeric code for the character. See
the table of characters available and the corresponding numeric codes.
• Press
Programming the machine
or until the character is at the right hand end of the display.
to delete the last character.
Shift
then . Do not press any other key.
ALT
followed by the numeric code keys for the character required.
4.2 Creating and editing text
section 17.1, page 237, for
IM series User Instructions