30
To enter Manager Mode
You can enter Manager Mode by pressing test, and following the sequence described
below.
Note: The factory default setting for operator 1 PIN is 4296 and for operator 1 security level
is 2. All other operators will have factory default settings of PIN 0 and security level 0
unless you change them.
For information on changing an operator PIN and security level see
Operators on page 53
1
3
operator number
5
Programming the machine
.
0 - 99
enter PIN
2
while all segments are
displayed
4
6
IM series User Instructions
4.1 Manager mode
Programming